User manual

23
HDD to CD Speed
Adjusted to: 8x
Di scmakers X.xx
1. Copy (SM)
Discmakers X.xx
8. Master Mode
Master Mode:
Single Master
Master Mode:
Multi Master
The options that are available are shown in Table 2 - 1.
Duplication Type Speeds Available
HDD to CD Speed
1x, 2x, 4x, 8x, 10x, 12x, 16x, 24x, 32x,
40x, 48x, 52x
HDD to DVD
Speed
1x, 2x, 2.4x, 4x, 6x, 8x, 12x, 16x, 18x,
20x
HDD to BD Speed
1x, 2x, 2.4x, 4x, 6x, 8x, 12x, 16x, 18x,
20x
Table 2 - 1 Duplication Speeds
These options migh t change depending on the CD, D VD or Blu - Ray Disc W riters pre - installed in
your system .
Note: The speed that you choose may be adjusted by the drives and/or the media for
optimized duplication.
Once your selection has been changed successfully, you will see the following screen for 2
seconds:
You will automatically be returned to the Main Menu.
7. Select So urce
The Select Source menu or the Source quick key is used to set the Master Reading Source. In the
autoloader , the Master Reading Source is always the Hard Drive.
8. Master Mode
The Master Mode menu is used to select between Single Master mode or Mu lti Master mode. For
more information on the modes, see Single Mas ter and Multi Master Modes on page 1 3 .
If you are at the 1. Copy Menu, do the following :
Use the Up or Down button to find the 8. Master Mode menu.
Press the ENT/ Enter button on 8. Master Mode to enter the menu
and you will see one of the following screens:
Use the Up or Down button to choose between Multi Master
mode and Single Master mode. Press the ENT/ Enter button to enter
your selection. The system will return you ba ck to the main menu.