User manual
24
Discmakers X.xx
1. Copy
(SM)
Discmakers X.xx
9. Erase
Counter:
No Counter
Loader Processing
Input Bin
>
Drive0
1
Processing ...
Please Wait
Quick Erasing...
0/25
Erase
Full
Erase
Erase
Quick Erase
9. Erase
Use the
Erase
menu
to erase your Rewritable
discs.
Use the
Up or
Down
button to find the
9.
Erase
menu
.
Press the
ENT/
Enter
button on
9.
Erase
to
enter the menu and you
will see the following screens:
There are
two options:
Full Erase:
This option erases the entire disc, destroying all
previously written data in the process.
Quick Erase:
This option erases the index (TOC) of the
Rewritable disc, not the data section. It is much faster than
Full Erase. However, t
he data section is still recoverable. In
order to ensure all old content on the RW disc is completely
ereased and unable to be recovered for security purposes,
you must utilize the FULL ERASE function.
Use the
Up or
Down buttons to se
lect between the
two options and press the
ENT/
Enter
button to continue.
Follow the instructions shown in Setting Counters on
page
14
to
continue. Once the counters have been set, press
the
ENT/
Enter
button to confirm.
The Robotic Arm will
initiate and
pick the dis
cs to be erased from the
Input
Spindle
and place them into the drives
.
As soon
as
the drives
are all full, or the number programmed into the counter is reached,
you will see the following:
The system will check all discs in the drive and prepare them to
be
erased. As soon as the checking process completes, the Erase RW
process starts.
The 0 indicates that zero discs have been erased so far. The 25
indicates the number programmed into the counter. Once
all
the
discs have been erased, you
will
see one
of these PASS/FAIL
screens
(next page)
: