User manual

29
All Stored Data will be erased .
Press OK to Continue
Setup
1. Language
Language:
English
Language:
Espanol
Press the ENT/ Enter button to format the Hard D rive.
After the Hard Drive has been format ted, the system
will return you to the Format Hard Drive menu .
11. Setup
The 11.Setup menu options are used to configure various options on the autoloader . The Setup
menu consists of the following sub - menus:
1 Language
2 Read Error Skip
3 CD Writing Mode
4 Max Audio, VCD & CDG Speed
5 Buzzer
6 Startup Menu
7 Screen Saver
8 Counter
9 DVD+R Compatibility Mode
10 ISRC
11 Disable Drives **
12 CD Overburn **
13 Max Failures per Job **
14 Max Failures per Drive **
Each of these options is discussed in its own subsection. **these options not available for all
mode ls
11.1 Language
This setting allows you to choose the language that you prefer to use when navigating the
autoloader . The autoloader sup ports multiple languages .
Use the Up or Down button to se lect the Language menu and
press the ENT/ Enter but ton to enter that menu.
Use the Up or Down button to se lect between the languages
and press the ENT/ Enter button to select that option.
11.2 Read Error Skip
Normally, when the autoloader encounters a read error while reading your master disc, the
duplication is aborted and all the recordable media in the writers are ruined. However, if you
believe that your master disc has a small, insignificant error due to physical damage, you can
enable this setting to al low the autoloader to skip any read errors it encounter s .
Note: This function does not fix the error; it only skips it to make the rest of the data readable.