User manual
33
System Utilities
1. Disc Info
Disc Info
Please Insert Disc
Disc Info
3 Disc Detected, GO?
Setup
12. CD Overburn
CD Overburn
ON
CD Overburn
OFF
11.1
1
CD Overburn
Most CD
-
R media
has a capacity of
650MB or 700MB. The burning starts from the center of the
C
D and works its way out but stops before the physical edge of the CD. Overburning is
a
burning
method to bypass the
disc
limitations
for
the edge of the CD
. T
his can
provide
slightly higher
capacity storage, however, it has also been known to
create
compat
ibility issues. Please use it
with caution.
Use the
Up or
Down
button to select the
12.
CD Overburn
menu and press the
ENT/
Enter
button to enter that menu.
Use the
Up or
Down
button to se
lect whether the
CD Overburn
feature
is ON or OFF, and pr
ess the
ENT/
Enter
but
ton to select that
option.
12. System Utilities
System Utilities
is
used to provide
information pertaining to the
autoloader
as well as modification
to maintain proper functioning. The
System Utilities are:
1
Disc Info
2
System Inf
o
3
Device Info
4
Load Default
5
Update Firmware
12.1 Disc Info
Use the Disc Info utility to identify the type and other information about your blank recordable
media.
.
Note:
The Disc Info function does not use the robotic capabilities of the
system
. Y
ou must
manually insert the discs into the drives.
Use the
Up or
Down
button to
select
the
Disc Info
menu and
press the
ENT/
Enter
button to enter that menu. The
system will
pro
ceed to the
Please Insert Disc
menu.
Place your disc(s) into the drives
.
After a few seconds, the
system
will detect the discs and ask you if
you want to proceed. Wait until all of
the
discs have been detected
and press the
ENT/
Enter
button to continue.