User manual
35
Discmakers X.xx
14.Manag
e
Accounts
Enter PWD
[ ] OK?
13. Loader Utilities
The Loader
Utilities menu consists of following subme
nu(s)
:
1
Update Robot Firmware
13.
1
Update Robot Firmware
Use this utility to update the software in your autoloader
s robot controller. To update, in
sert the
manufacturer s Certified Update CD into the 1
st
tray and make sure no other discs are in the
other
trays. Then you can press the
ENT/Enter
button to update.
You should not upgrade your
autoloader's robot firmware unless your system is becoming unstable or you are advised to do so
by Tech Support.
14. Manage Accounts
This feature allows the adm
inistrator to:
Create user accounts and passwords to prevent unauthorized use of this
autoloader
.
Edit existing user account information, including name and password.
Delete existing user account(s).
Enable or disable
Manage Accounts
Manage Accounts
is disabled by default. Prior to activating the Manage Accounts feature, the
autoloader recognizes all users as the Administra
tor. The pre
-
defined password for this function is
0000. By adding additional users, each individual user has his or her own
settings.
To take advantage of this feature, follow these instructions:
Change the Administrator password. Refer to Edit User Info on page 41
for additional
information.
Create a User Name and Password for each authorized person on this autoloader. R
efer
to Create User on
page 41
for additional infor
mation.
Enable the Manage Accounts feature by turning on the Password on Bootup setting.
Refer to Password on Bootup on page 42
for additional information.
Note:
This system comes with a standard license that allows you to create up to 32
users. However, if you desire to create more than 32 users, please contact Tech
Support Service regarding our special 64 user license pack.
To access the
Manage Accounts
feature, you need to perform the follo
wing tasks:
Use the
Up or
Down
button to select the
Manage Accounts
menu and press the
ENT/Enter
button to enter that menu. You will
be
shown the
Enter Password
menu.
The
system
will ask you for the Administrator's Pass
word.