User manual
38
Manage Accounts
5. Password on Bootup
Password on Bootup:
Yes
User Ralph
Deleted!
Discmakers X.xx
15
. AUTOCOPY
Counter:
No Counter
Preparing...
Please Wait
OK: 0 NG: 0 NB: 0
Input Bin > Drive01
ENT/Enter
button to delete the user.
The
autoloader
will display a confirma
tion message, and
automatically retu
rn you to the Manage Accounts menu.
14.5 Password on Bootup
This menu allows you to enable or disable the Password on Boot
-
up feature. During this process,
you will be asked to select Yes or No (enable or dis
able).
Press the
ENT/Enter
button
to enter into this menu.
Use the
Up or
Down
button to se
lect either Yes or No. Press
the
ENT/Enter
button to enter the selection.
15. AUTOCOPY
The Autocopy function is the simplest way to make CD/DVD
/Blu
-
Ray Disc
copies. It simplifies the
copy pro
cess by
not requiring that the
project
be pre
-
loaded on the hard drive. Simply
place
the
master disc
on
top of the first Input Spindle and it will be loaded onto a reserve partition
in the HDD.
T
he data
is
transferred automatically
to all of the blank dis
cs which follow it. To make copies in
Autocopy mode, you simply:
Fill the input spindle(s) with the required number of blank discs
Place the Master disc on top of the stack in the first input spindle
Press the
15. AUTOCOPY
button
Fill the input spin
dle(s) with blank discs. Place the Master disc on top
of the stack
of blank discs o
n the first input spin
dle, and press the
ENT/Enter
button. You will then
see the
Counter Selection
menu.
Follow the instructions shown in Setting Counters on page 14
to
continue. Once the counter
ha
s
been set, press the
ENT/Enter
button to confirm. You will
then
see the
Preparing
screen:
After a short interval, the robotic loader will pick the top disc
(the
Maser Disc)
from the input spindle and place it into one of th
e drives.
As this is happening, you will see a screen similar to below:
This information screen shows what is happening. In this case, the
loader has taken a disc from the input spindle and is placing it into
Drive 1.
The loader will
perform the load
ing process which will transfer the content of your master disc into
the reserved partition of the hard drive.
Upon
the
successful loading process, the system will drop the Master Disc
o
nto the output
spindle.