User manual

39
Processing...
Please Wait
OK: 3 NG: 0 NB: 0
Input Bin > Drive01
OK: 0 NG: 0 NB: 0
Input Bin > Drive0 1
It will then pick up the blank discs from the input spindle and place
those into drives until either all of the drives are full, or the count that
you loaded into the counter is reached.
It takes a few seconds for the autoloader to recognize all the discs.
After two or three seconds of proc essing time, one of the following Copy Progress screens will
appear.
Counter Specified No Counter Specified
Copying... H4012MB
0/21 12% 481MB
or:
Copying... H4012MB
0 12% 481MB
H indicates the
source of the job
resides in the Hard
Drive.
4012MB indicates the
ca pacity of the master
disc.
12% / 481MB
indicates the current
progress of the
duplication.
0/21 indicates you
have a project size of
21 copies and you have
made 0 copies so far.
H indicates the source
of the job r esides in the
Hard Drive.
4012MB indicates the
ca pacity of the master
disc.
12% / 481MB
indicates the current
progress of the
duplication.
0 indicates you have
made 0 copies so far.
Note: It is normal to see the progress indicator stay at 0%- 10% and 100% for
approximately 30 seconds for CD duplication and up to one minute for DVD/Blu - Ray Disc
duplication. That is caused by the initializing and finalizing stages.
Once the duplication run is completed, the loader will remove the
finished disc fro m a drive and place the successful copy on the
Output Spindle .
After the loader has placed the copied disc into the Output Spindle, t he loader will then pick up
another blank disc and load it into the drive.
The copying process will continue until y ou either run out of blank
discs or until the count that you loaded into the counter is reached.
OK: 3 NG: 0 NB: 0
Drive01 - > Output Bin