Installation Manual

7
6. Operation
▲ NOTE!
Review operating limits.
6.1 On–O
• To turn the battery on press and hold switch for 2-3 seconds
• To turn the battery off press and hold switch for 2-3 seconds
6.2 Charging
Before operating the charger make sure to read and understand the instructions that come with the charger. Never attempt to
charge a battery without rst reviewing and understanding the instructions for the charger being used.
▲ CAUTION!
Always make sure the chargers charging curve meets the
battery’s charging requirement; never charge a visibly
damaged battery; never charge a frozen battery.
1. Connect the charger leads to the battery.
2. Make sure that the charger lead, both at the charger and the battery side, connections are tight.
3. Turn the charger on.
4. Turn the battery on (if required).
▲ CAUTION!
NOT ALL CHARGERS ARE CAPABLE
OF CHARGING LITHIUM BATTERIES!
During system design CONFIRM that your chosen charger
is not capable of transient spikes that exceed the published
MAXIMUM TERMINAL RATINGS of the battery.
LOAD / CHARGER LOAD / CHARGER
LOAD / CHARGER LOAD / CHARGER
CHARGER CHARGER
ALTERNATE 1 ALTERNATE 2
CHARGER CHARGERLOAD LOAD
LOAD LOAD
All parallel cables should be the same length. All parallel cables should be the same length.
All parallel cables should be the same length. All parallel cables should be the same length.
All cables should be the same length. All cables should be the same length.