User's Manual

8. Troubleshooting
8.1 I cannot connect to the Internet using Manual
Setup.
Ans: Ensure you have used Menu  Save when
exiting the advanced settings page.
8.2 I can see my access point name, but I cannot
connect to the Internet.
Ans: If your access point (AP) supports multiple
access points at a time, you may have to connect
the device using WPA encryption and not WEP.
Please refer to your AP device manual for setup
details.
8.3 My MicroSD card is not being detected and/or
shows damaged SD card.
Ans: Please re-insert the MicroSD card and try
again. If this does not work, please restart the
device again with MicroSD card inserted. Please
ensure that you have removed the MicroSD card
using the correct procedure as described in
section 4.