User guide

Receiver Customization

Using Caller ID

To use the external hard-disk drive feature:

1 Purchase a USB 2.0 hard-disk drive from a consumer electronics retailer.

2 Connect the drive to one of the receiver’s three USB ports, making sure to follow any

connection instructions that came with the hard-disk drive.

Note: Currently, the receiver supports having one USB device connected at a time. If you

have a second USB device such as a flash drive or portable device connected to the

receiver, you should disconnect it before connecting the external hard-disk drive.

3 If the hard-disk drive is compatible, you’ll see a pop-up message screen confirming the

device’s connection and asking if you want to manage its contents. Select Yes.

4 Follow the on-screen prompts.

5 Once the external device is recognized, you’ll see a pop-up message asking if you want to

format the drive—formatting is necessary to store your recorded programs on the external

hard-disk drive. Note that selecting Yes will cause anything stored on the external hard-

disk drive to be erased, the drive to be formatted for use with your receiver, and then the

receiver to reboot. You can use the Manage Device option to view and manage programs

stored on the external hard drive. Use the Send to Device option to transfer programs

from your receiver to the external hard-disk drive. Copy protection for certain content may

apply. Visit our website at mydish.com/copyprotection

for more information.

6 Press the MENU button and then highlight and select the Recordings Transfer tile to

transfer DVR content from your Hopper HD DVR to your external hard drive.

USING CALLER ID

Caller ID displays on your TV if you subscribe to Caller ID from your local phone company.

To use this feature, make sure you have a phone line connected to the receiver, Caller ID

is enabled on your phone line, and that the Caller ID option is selected on your receiver.

Setting Up Caller ID Display

Use these instructions to enable or disable the Caller ID feature on your receiver:

1 Press the MENU button, highlight and select the Settings tile from the Main Menu screen.

2 Highlight and select Network Setup, and then Caller ID.