- Dish Networks Receiver User Guide

lPage 33
Using Timers
EDITING AN EVENT TIMER
You can edit almost any feature of an event timer.
You can edit both automatic and manual event timers.
Editing an automatic event timer converts the timer to a manual event
timer that operates at the times you set, not the actual program times.
1. Press the Menu button.
2. Select the
Timers option.
3. The receiver displays the
Event Timer Management menu.
4. Select the event timer that you want to edit. A check mark appears in
the box next to the event timer. Select the Edit option.
5. You may change the
Timer Type, Timer Frequency, or Channel. To do
this, select each option that you want.
6. If you want to change the Start Time, the End Time, or the Date, select
the Set Date/Time option to display the Set Date/Time
for Manual Timer
menu. Otherwise, skip to step 9, below.
7. Use the NUMBER PAD buttons to enter the
Start Time (this includes
selecting AM or PM) and the End Time (this includes selecting AM or
PM).
8. Use the NUMBER PAD buttons to enter the
Date.
9. Select the Create Timer option.
10. To edit another event timer,
Either: Highlight that timer and select the Edit option again.
Or: If you do not want to edit another event timer, press the CANCEL
button.