- Dish Networks Receiver User Guide

Page 27
Initial Set Up for Off-Air Broadcasts or Cable
4. Select the Save option to add the channel. This opens the Edit Local
Channel Name
menu:
Highlight a letter and press the SELECT/OK button. Do this again to spell
out the channel name. You can enter up to five characters. If you need to,
use the
SPACE option to insert a space or the <BACK option to correct a
letter. When you are done entering the channel name, select the
Save
option. This opens the
Local Channel Setup menu again.
5. Repeat steps 3 through 5 if you want to add another local digital channel.
6. To delete one or more channel(s), select the channel(s) in the
Channels list
and then select the
Remove option.
7. Select the
Save option to leave the Local Channel Setup menu.
How to Add Local Off-Air Analog Channels
To add a local analog channel:
1. Press
MENU 6-1-5 to open the Local Channel Setup menu.