DISH Network 130885 SR200 User’s Guide
Warning and Attention Symbols You must be aware of safety when you install and use this system. This User Guide provides various procedures. If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. The WARNING! symbol means that if you are not careful, You could injure or kill yourself, or You could damage equipment or property.
Safety Precautions Warning Take the following precautions to prevent traffic accidents and avoid personal injury: • • • • • • • • • • Installation must be performed according to this installation manual. DISH Network is not responsible for issues arising from installations not performed according to the procedures in this manual. Do not install the unit where it may obstruct your view through the windshield or of your vehicle’s indicator displays.
Warning Take the following precautions to prevent fire and avoid personal injury: • • • • • To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the unit. If the unit emits smoke or strange smells, turn the power off immediately. Do not drop the unit or subject it to strong shocks. If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal.
Caution Take the following precaution while setting up your SR200: Don’t push any buttons or perform any operations until updating has been completed. Once all updated SIRIUS channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and will place you in SIRIUS Satellite Radio’s Preview Channel. Channel 184 is the SIRIUS preview channel. You will not be able to tune to any other channels until you activate your SIRIUS subscription.
Table of Contents Box Contents .................................................................................................................................. 1 Quick Start Guide ........................................................................................................................... 3 Installation Instructions ................................................................................................................. 4 Installation in a Vehicle: Mounting the Antenna ..............
CONGRATULATIONS! Your new SR200 portable Plug-n-Play from DISH Network lets you enjoy SIRIUS® Satellite Radio’s digital entertainment channels. Use this manual to familiarize yourself with all of SR200’s features and capabilities.
Cigarette Lighter Power Cord Windshield Mount Antenna If anything is missing or damaged, or if your SR200 fails to operate, notify your dealer immediately. If your SR200 was shipped to you directly, notify your shipper immediately. DISH Network recommends that you retain the original carton and packing materials in case you need to ship your SR200 in the future. Note: Do not put the SR200 in the docking station until you have completed the installation.
Quick Start Guide After you have successfully installed the SR200 and activated your SIRIUS subscription, the Normal Operation screen will appear. The SR200 has four ways to find music: • Select Music with the NAVIGATION WHEEL. Turn the NAVIGATION WHEEL to find channels you like. When you stop turning the NAVIGATION WHEEL, the SR200 tunes to the selected channel. • Select Music by Direct Tuning. Press the NAVIGATION WHEEL and then use the 0-9 buttons to enter the channel you want to hear.
Installation Instructions 1. 2. 3. 4. 4 Determine where you want to mount SR200. • Do not install SR200 where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays. • Do not install SR200 where it will hinder your access to the vehicle’s controls. • Do not install SR200 where it may hinder the function of safety devices such as an airbag. Doing so may prevent the air-bag from functioning properly in the event of an accident.
Installation in a Vehicle: Mounting the Antenna 1. 2. 3. 4. 5. 6. Temporarily plug the antenna into the ANT connector on the back of the cradle until it is firmly seated. Find an antenna location on a metal surface of your vehicle at least 12" x 12", and at least 6" from a window. • Best reception is achieved with the antenna mounted on the roof (trunk for convertibles). • If the vehicle has a roof rack or skid ribs, it may be necessary to mount the antenna off-center.
Installation in a Vehicle: Running the Antenna Cable 1. 2. 3. 4. 5. 6. 6 Turn SR200’s power off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle. Route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown below. Route the cable from the lowest point of the rear window into the trunk. Take advantage of any existing cable channels or wiring conduits.
SR200 Controls and Features POWER Button Turns SR200 On and Off; exits the Channel, Category, Song and Artist List modes. NAVIGATION WHEEL Navigates through display screens and makes selections of items highlighted on the display. Clockwise increases or moves up in the menus. Counterclockwise decreases or moves down in the menus. Press the NAVIGATION WHEEL to makes selections. CATEGORY Up/ Down Button Navigates through Category List screen which displays SIRIUS Channel Categories.
Preset Number Buttons (0-9) Sets and selects preset channels. Memory (MEMO) Button (S-Seek Function) Saves and recalls artist names and song titles. You can store up to 20 artist/song title combinations. Band Button (P.Tune) Pressing and releasing switches between preset banks A, B, and C, which hold 10 presets each. Pressing and holding enables Preset Tune Mode, which allows for viewing and listening of stored presets with turn of the NAVIGATION WHEEL.
Remote Control Functions POWER Button Turns SR200 on and off. CH+/ CH-/ CAT+/ CAT- Buttons Navigate through channels, categories, and display screens. Mute Button Mutes audio. PREVIOUS (PREV) Button Navigates back to previous channel. DIRECT Button Accesses channels directly by number. SELECT (SEL) Button Press to select items highlighted on the display; hold-down to jump to the previously-received channel. MENU Button Enters and exits the Setup Mode.
MEMORY (MEMO) Button Saves and recalls Song and Artist information; sets Parental Lock code number. DISPLAY Button Changes text size of artist names and song titles. BAND Button Switches between preset bands A, B, and C. Number Buttons (0-9) Selects channels directly and by preset. Installing Batteries in the Remote 1. 2. 3. Remove the battery cover. Install two AAA batteries. Replace the battery cover. Activating your SIRIUS Subscription 1. 2. 3.
4. 5. 6. Note: Don’t push any buttons or perform any operations until updating has been completed. Once all updated SIRIUS channel channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and will place you in SIRIUS Satellite Radio’s Preview Channel. Channel 184 is the SIRIUS preview channel. You will not be able to tune to any other channels until you activate your SIRIUS subscription. Press the MENU button to enter the Setup Mode.
1. 2. Use the CATEGORY button to scroll through music and entertainment categories. When the category (for example, Rock) you want is highlighted, use the NAVIGATION WHEEL to highlight the channel you want to hear. 3. When the channel you want is highlighted, press the NAVIGATION WHEEL to listen to the channel. The display will revert to the Normal Operation screen for that channel.
Selecting Music by Artist (Artist List Mode) 1. 2. 3. While the Channel List screen is active, press the DISPLAY (DISP) button once. The Artist List screen will appear, showing all currently-playing artists regardless of category. • If composer information is available for a channel, it will be displayed along with the artist information. Use the NAVIGATION WHEEL to move through the list of Artists. When the Artist you want to hear is highlighted, press the NAVIGATION WHEEL to listen to them.
Setting Channel Presets You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 3 banks, A, B, and C, each containing 10 channel presets. 1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right corner of the Normal Operation screen. 2. Select the channel you want to preset (see Basic Operation and Selecting Music). 3. Hold the number button you want to store the channel in for at least 2 seconds.
Preset Tune Mode When in the P.Tune Mode, press and hold the DISP button for 2 seconds; this exits normal preset tuning and enters a 6-line menu mode which displays the Preset Number (A-1, for example), a single space and the 20-character channel name. While in the Preset List menu, pressing the DISP button once will change to Artist List; a second press of the DISP button changes to Song Title List. P.Tune Mode Screen P.Tune Channel List Screen P.Tune Artist List Screen P.
Note: The field will scroll only if the length of the artist or title cannot be viewed in its entirety. Pressing and holding the DISP button will enter the channel list mode. While in the Channel List mode, any subsequent press of the DISP button will display program information by Artist Name or Song Title. Pressing and holding the DISP button will exit the Channel List mode and return to the previously selected tuning/display mode.
2. By holding down the MEMO button for 3 seconds, the stored memory information (one at a time) is displayed on the screen in page format. Use the NAVIGATION WHEEL to scroll through the 20 entries. This function allows you to recall information regarding the Artist/Song Title for your own personal review. Memory Select Screen 3. 4.
a. 5. If one or more matches are found, a display list appears, and allows you to scroll through the list of songs using the NAVIGATION WHEEL. Once a song is found, it can be selected by pressing the NAVIGATION WHEEL, and the display will revert to either of the selected display modes. b. If a selection is not chosen within 10 seconds after the last action, the screen will revert to the previously selected display and tuning mode.
Menu Display Options To enter the Menu Options page, press and hold the MENU Button. The Menu Options list will appear on the LCD display. Using the NAVIGATION WHEEL, highlight the option you wish to adjust and press the NAVIGATION WHEEL to make the selection.
SIRIUS ID Displays your 12 digit SIRIUS ID number. No adjustments are allowed in this mode. To exit this option, press the NAVIGATION WHEEL or MENU Button. Display Settings SIRIUS SID Screen The following adjustments are possible: Dimming Control Contrast Control To enter either of these modes, use the NAVIGATION WHEEL to highlight the option you wish to adjust and the press the NAVIGATION WHEEL to make the selection.
FM Transmitter Options The following adjustments are possible: FM On/Off Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the FM On or FM Off function/display selection. To select and exit this function, press the NAVIGATION WHEEL. No button activity for 10 seconds will also exit this function. Channel Add/Skip Upon entering this mode, a channel list shall be displayed with the current channel in play highlighted.
Lock Options Upon entering this mode for the first time, the user is prompted to enter the default four digit numerical code. All future entries into this mode display a channel list with the current channel in play highlighted. The NAVIGATION WHEEL is used to navigate the list and highlight the channel to be locked or unlocked.
Edit Code Upon entering this mode, the user is prompted to enter the current four digit numerical lock code. Once the correct code has been entered, the user is prompted to enter a new 4-digit code twice. The second entry is requested for confirmation. Lock Options Screen Edit Lock Code Screen Audio Level Upon entering this mode, a 10 segment horizontal bar graph is displayed with a Minus (-) sign to the left and a Plus (+) sign to the right. The current setting is indicated on the bar graph.
Antenna Aiming Upon entering this mode, a 10 segment horizontal bar graph is displayed with a Minus (-) sign to the left and a Plus (+) sign to the right. The current setting is indicated on the bar graph. Moving the antenna location adjusts the bar graph signal strength indication, thus ensuring optimum reception. To exit this function, press the NAVIGATION WHEEL or MENU button. Memory Options Antenna Aiming Screen In this mode, the user can turn the Memory Search Function (S-Seek) on or off.
Clock When entering this menu option, you can set up the clock shown on the Normal Operation screen, based on the format desired, and the time zone in which you reside. The clock data is provided via the SIRIUS Satellite channel, and will update based on the received signal. Format The Clock Format option provides: • 12 Hour (Default) • 24 Hour Use the NAVIGATION WHEEL to highlight the desired format and press the NAVIGATION WHEEL.
Alarm Clock When this menu option is highlighted and selected, you will be able to set the unit to turn on at a specific time. The last selected channel prior to shutdown will be present when the Alarm feature is activated. Alarm appears on the first line of the display followed by the alarm options: Set Alarm (Default-Off) Use the NAVIGATION WHEEL to toggle between Alarm On or Alarm Off and press the NAVIGATION WHEEL for desired alarm status.
Time/Day Rotating the NAVIGATION WHEEL toggles between Time and Day. If Time is selected, use the NAVIGATION WHEEL increase (clockwise) or decrease (counterclockwise) the set time in a circular motion on one line in the middle of the display from the default value (12:00pm). When the desired time is displayed, press the NAVIGATION WHEEL. If Day is selected, the screen displays a default day of Monday, with selectable choices of Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday.
Cancel Auto Shutdown Press the NAVIGATION WHEEL to terminate the function temporarily. The following options are available in this mode: • Enabled • Disabled (Default) Rotate the NAVIGATION WHEEL to toggle between Enabled and Disabled. When the desired shut down status is highlighted, press the NAVIGATION WHEEL. Sleep Mode In this mode, you have the capability of programming the unit to shutdown after a selected period of time.
Factory Default The Factory Default screen displays the text Restore Settings with the options: Yes/No. Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the Yes or No function display selection.
Troubleshooting Fault Possible Cause Solution SR200 does not turn on Blown Fuse, power cable not properly connected. Check fuse, check power cable. Antenna Not Detected display message Satellite antenna not connected. The antenna or cable is faulty. Check satellite connection to the SR200. Contact the system installer or vendor. Audio static or loss of clarity FM Frequency contains static. Vehicle antenna not connected to the radio. Switch to another FM frequency. Check the vehicle antenna cable.
Specifications Audio Output ..................................................................................................................... 2.2V (Peak-to-Peak) Total Harmonic Distortion (THD) .......................................................................................................... <0.3% Signal-to-noise (S/N) ........................................................................................................... Greater than 75dB Fuse Requirement ....................................
Limited Warranty This Limited Warranty is a legal document. Keep it in a safe place. Remember to retain your Bill of Sale for warranty service! Any items returned without a copy of the Proof of Purchase will be considered out of warranty. What the Warranty Covers This warranty extends only to the original user of the equipment and is limited to the purchase price of each part.
What the Warranty Does Not Cover This warranty does not cover installation of the system. If applicable, such installation will be warranted under a separate installation agreement. This warranty does not cover consumer instruction, physical setup or adjustment of any consumer electronic devices, remote control batteries, signal reception problems, loss of use of the system, or unused programming charges due to system malfunction.
Legal Limitations REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ECHOSTAR SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS SYSTEM, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS SYSTEM. UNDER NO CIRCUMSTANCES SHALL ECHOSTAR’S LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE PAID FOR THIS SYSTEM.
5. 6. Returned equipment must be packaged properly, using either the original shipping materials or the packaging in which the replacement equipment is shipped. Include a copy of the Bill of Sale. Any items returned without a copy of the Proof of Purchase will be considered out of warranty. Follow the instructions given to you by the Customer Service Representative. Write the RA number in large, clearly visible characters on the outside of the shipping box that you use to return the equipment.
Notes 36
Copyright © 2004 EchoStar Technologies Corporation Englewood, Colorado 80112 All rights reserved. The information in this Guide may change without notice. We may issue revisions to tell you about such changes. Send any comments or questions to: EchoStar Technologies Corporation, Technical Publications, 94 Inverness Terrace East, Englewood, Colorado 80112 Part Number: 130885 DISH Network is a registered trademark of EchoStar Satellite L.L.C. For information about DISH Network, visit our website at www.