System information

S7000 Series TV Analyzer Operation Manual
101
4.4 DISH
Dish alignment function as shown in Figure 4-14. User can use this function to align dish antennas.
Figure 4-14
NOTE: Dish alignment function supports at most 10 transponders. If user select more than 10 transponders,
S7000 only measure the first 10 enabled transponders. Otherwise, S7000 measures the whole enabled
transponders. Figure 4-14 displays 6 transponders.
S7000 measures the quality and strength of transponders to align the dish.
The dish align step is as follows:
1. Select the target satellite. Refer to Figure 4-14.
2. Setup each transponder enable/disable in CH INFO function as shown in Figure 4-15.
3. Setup LNB power supply and GPS.
Figure 4-15