System information

S7000 Series TV Analyzer Operation Manual
106
4.5.1 Parameters
DiSEqC (Digital Satellite Equipment Control) command list:
Class
Command
Parameter
General
RESET
----
STANDBY
----
POWER ON
----
Switch
SATA/B
A/B
DiSEqC1.0 SWITCH
1 to 4
DiSEqC1.1 SWITCH
1 to 16
Positioner
HALT
----
DISABLE LIMITS
----
SET LIMIT EAST
----
SET LIMIT WEST
----
DRIVE EAST SEC
1 to 127
DRIVE EAST STEPS
1 to 127
DRIVE WEST SEC
1 to 127
DRIVE WEST STEPS
1 to 127
STORE POSITION
1 to 255
GOTO POSITION
1 to 255
GOTO X.X°
-80° to 80°
GOTO 0
----
Table 4-1
SaTCR command list:
Command
Parameter
Description
SaTCR STATUS
ENABLE /DISABLE
Enable or disable the SaTCR function.
NUM OF SLOTS
2 / 4 / 8
Num of SaTCR LNB channels
SELECT SLOT
0 to 7
Selected SaTCR channel.
SLOT STATUS
ON / OFF
Set the channel status
SaTCR A/B
A / B
Switch SaTCR LNB
SLOT0
950MHz-2150MHz
Channel frequency
SLOT2
950MHz-2150MHz
Channel frequency
----
----
----
----
----
----
SLOT7
950MHz-2150MHz
Channel frequency
Table 4-2
NOTE: S7000 supports 8 slot maximum.