System information

S7000 Series TV Analyzer Operation Manual
107
4.5.2 Operation
 SaTCR/DiSEqC Press this key to switch between DiSEqC and SaTCR.
 Press keys (UP/DOWN) to select command/parameter.
 In DiSEqC function, press keys (LEFT/RIGHT) to adjust command parameters.
 Press this key to send command.
 Shortcut key to power feed control function.
NOTE: 1. DiSEqC&SaTCR command sending function is disabled, when LNB power is off or in use.
2. When sending DiSEqC&SaTCR command, any key’s operation is not active.