System information

S7000 Series TV Analyzer Operation Manual
112
5.2.1 Description
 SID: the program number in 10 or 16 system according to the Setup.
 CA:
stands for not encrypted, and
stands for encrypted.
 Service Name: the service name of the program, ‘---’is displayed if the description is not exist.
 Provider: the provider of the program, ‘---’is displayed if the description is not exist.
 Service Type: the brief description of service type of the program.
 Video Type: the video type of the program, ‘---’is displayed if video information is not included in the
program.
 Resolution: the video resolution, ‘---’is displayed if the video information is not parsed.
 Video PID: the video PID of the selected program.
 Video Bitrate: the video bitrate of the selected program.
 Audio PID1: the first audio PID of the selected program.
 Audio Bitrate1: the first audio bitrate of the selected program.
 Audio PID2: the second audio PID of the selected program.
 Audio Bitrate2: the second audio bitrate of the selected program.
5.2.2 Operation
 To select a program.
 To increase or decrease the volume if decoding.
 To switch full video screen and small video screen if decoding.
 RealTime To execute RealTime Decoder subfunction, Refer to Figure 5-1.
 REC To execute Recorder subfunction to input record file name if the key is enabled, Refer to
Figure 5-4.
 REPLAY To execute Replay subfunction and show the file list stored in U disk, Refer to Figure 5-6.
The key is disabled if there is no U disk or no TS or TRP file stored in the disk.
 CH To execute Channel Edit, Refer to Figure 5-3. The key is disabled if the input source is not
RF.
 NEXT>> Press this key to next page as Figure 5-8.