System information

S7000 Series TV Analyzer Operation Manual

1.3.5 Power Supply

S7000 is powered by both built-in battery and external power adapter. Please charge S7000 before using.

1.3.5.1 Battery

S7000 TW use built-in 7.4V/13AH Li-Polymer battery and work over 5 hours when fully charged. Once the voltage

of the battery is lower than 7.15V, S7000 TW pops up a message box: LOW BATTERY! Once the voltage of the

battery is lower than 6.8V, S7000 TW pops up a message box: LOW BATTERY! and the battery icon flashes. Once

the voltage of the battery is lower than 6.5V, S7000 TW pops up a message box: LOW BATTERY! and the buzzer

bells. The instrument will shut down automatically after the buzzer stops belling.

NOTE:1 The instrument can be only charged by the charger provided together with S7000.

2 It is suggested to power off the instrument when charging.

3 Low temperature may reduce the capability of the battery, but the battery will not be damaged; And

high temperature will cause the unrecoverable damage.

4 Please replace the battery when its working hours shorten distinctly.

1.3.5.2 Charge

Please charge the instrument as following charge process:

1) Insert the charge output plug to S7000 charge socket.

2) Connect the charger to AC 100V-240V Power and the charge light will light with red.

3) When the charge light becomes to green, the instrument has been charged the whole capacity. We suggest

you charge one more hours to extend battery life. After charging, you can disconnect the charge input plug

with power and pull out the charge output plug.

NOTE: The battery must use the relevant charger to charge. The instrument can not be charged in the

temperature beyond 10℃～35℃, otherwise the battery life will be shorten.