System information

S7000 Series TV Analyzer Operation Manual
13
2.1.3 General Settings
Select the GENERAL Tab to display and adjust the general system settings. The following settings are included in
the GENERAL Tab, as shown in Figure 2-3.
 Network Settings
 PING
 Display and Battery Settings
 Date and Time Settings
 Skin Settings
 Language Settings
 Operator Name
 Factory Reset
2.1.3.1 Network Settings
Users may access network with RJ45 connection.
 Automatic Network Parameters, refer to Figure 2-3.
To enable automatic network parameters sent from a DHCP server, perform the following steps:
1) Select keys (UP/DOWN/LEFT/RIGHT) to highlight the DHCP check box.
2) Select key (ENTER) to select the check box.
3) Once the DHCP check box is selected, the IP Address, Net Mask, Gateway, and DNS will all be assigned by
the DHCP server and can not be manually adjusted.
Figure 2-3