System information

S7000 Series TV Analyzer Operation Manual
14
 Manual Network Settings, refer to Figure 2-4.
To enable manual network parameters, perform the following steps:
1) While the DHCP check box is not selected, select key (TAB) or keys (UP/DOWN/LEFT/RIGHT) to
highlight the first segment of the IP ADDR field. Refer to Figure 2-4.
2) Use the Alphanumeric Keypad to enter the address value.
Select key (TAB) or keys (UP/DOWN/LEFT/RIGHT) to highlight the remaining address segments and
repeat until all addresses are populated.
Figure 2-4