System information

S7000 Series TV Analyzer Operation Manual
15
2.1.3.2 PING
PING is used to check the network smooth and the connection speed. The current IP address of S7000 is
regarded as the source IP (If you want to amend IP address, you should select NETWORK.). Please connect S7000
and the destined instrument by LAN line, input the destined IP address in the column (Please make the two IP
address on the same network segment), then press START to start testing. During testing, START will be STOP.
The test information will be shown on the screen in real-time. Refer to Figure 2-5.
Figure 2-5
Setup instruction:
-n, Data package quantity of ping command.
-i, The time interval of data package sending, the unit is MS.
-l, Data package length of Ping.
-t, When -t option is selected, it will run ping command continuously, send no more than 100 packets.
Otherwise, it will send n packets.