System information

S7000 Series TV Analyzer Operation Manual
24
2.1.5 Channel Settings
Select the CHANNEL Tab to display and adjust the channel settings. The following settings are included in the
CHANNEL Tab.
 Selecting an Active User Channel Plan
 Learning a User Channel Plan
 Editing a User Channel Plan
 Editing a Tilt Measurement Channel Plan
 Satellite List
 Adding Satellite
2.1.5.1 Select User Channel Plan
Up to sixteen user channel plans can be built and saved. The user channel plans are labeled as [UsrPlan00]
through [UsrPlan15] and the user can select only one user channel plan as the active plan. S7000 will measure
according to the parameters and settings entered in the selected user channel plan.
To select the active user channel plan, perform the following steps:
Select keys (UP/DOWN/LEFT/RIGHT) and key (ENTER) to select the desired user channel plan. After
selecting the plan, use the Alphanumeric Keypad to enter the user channel plan name (if desired), as shown in
the Figure 2-20.
Figure 2-20