System information

S7000 Series TV Analyzer Operation Manual
25
2.1.5.2 Learn User Channel Plan
Before attempting to use S7000, the user must create a User Channel Plan. Once completed, this will allows
S7000 to measure all the channels automatically and save the various measurement data.
Perform the following steps to learn a User Channel Plan:
Connect S7000 to the cable system.
1) Select keys (UP/DOWN) to select the LEARN USER PLAN, as shown in Figure 2-21.
2) Select keys (UP/DOWN) to select the type of user channel plan from CCIR, NCTA, OIRT and CHINA.
3) Select key (TAB) or keys (UP/DOWN/LEFT/RIGHT) to highlight ANALOG and/or DIGITAL, then
select key (ENTER) to select one or both types of channels to include in the user channel plan. Refer to
Figures 22 and 23.
4) If the Digital Channel Type is selected, proceed to Step 5). Otherwise, proceed to Step 6).
5) When the Digital Channel type is selected in Step 4), the Bandwidth (BW), and Standard can also be edited.
Bandwidth:
Select keys (UP/DOWN/LEFT/RIGHT) to highlight BW, then use the Alphanumeric Keypad to enter the
Bandwidth value. Select key (ENTER) to accept the new Bandwidth value.
Standard:
Select keys (UP/DOWN/LEFT/RIGHT) and key (ENTER) to select STANDARD, then select key
(ENTER) to accept the highlighted STANDARD.
Modulation Type:
Select keys (UP/DOWN/LEFT/RIGHT) and key (ENTER) to select TYPE, then select key (ENTER)
to accept the highlighted modulation type.
Symbol Rate:
Select keys (UP/DOWN/LEFT/RIGHT) and key (ENTER) to select SR, then use the Alphanumeric
keypad to enter the Symbol Rate value. Select key (ENTER) to accept the new Symbol Rate value.
6) Select keys (UP/DOWN/LEFT/RIGHT) to highlight the START Button.
7) Select key (ENTER) to start learning the user channel plan.
8) When the learning process is completed, S7000 will automatically save the settings to the active user
channel plan.