System information

S7000 Series TV Analyzer Operation Manual
28
2.1.5.4 Edit Tilt Plan
Up to sixteen channels can be tested in Tilt Measurement Mode. Select keys (UP/DOWN) and key
(ENTER) to enable the channels you wish to add to the Tilt Measurement. (To disable a marked channel, select
key (ENTER) again.)
The ‘√’ indicator is shown to mark the enabled channels. They will be displayed in sequence according to their
frequency value in the table, as shown in the Figure 2-26.
Figure 2-26
Press key (ESC) to exit, one dialog box will appear: Are you sure to save the changes? Select ‘YES’ to save
and ‘NO’ to exit without saving.