System information

S7000 Series TV Analyzer Operation Manual
49
3.1.4 DVB-T2
The interface of DVB-T2 Channel Measurement refers to Figure 3-7. It can measure Power level/MER/CBER/LBER
and so on.
Figure 3-7
3.1.4.1 Parameters
 CH, Show the channel number of the current channel.
 FREQ, frequency (5MHz ~1050MHz).
 BW, bandwidth (6MHz, 7MHz, 8MHz).
 PLP ID. The default PLP ID is 0. The instrument can get the PLP information automatically when the current
channel is locked. When the sum of PLP is above 1, users can edit PLP ID to set up other PLP.
3.1.4.2 Operation
 VIEW Press the key to switch the display between Power level/MER/CBER/LBER, when the
current channel type is DVB-T2.
 CONS Press the key to enter Constellation diagram function directly.
 SPECT Press the key to enter SEPCTRUM function directly.
 T2 INFO Press the key to enter the function of DVB-T2 parameters.
 ECHOES Press the key to enter ECHOES function directly.
 CNR Press the key to enter CNR function directly.