System information

S7000 Series TV Analyzer Operation Manual
69
3.5 Tilt measurement
Tilt measurement is the effective solution to check the flatness and splitter’s gain of cable system, S7000 can get
levels of 16 channels and observe the measurement result and graph easily.
Users can set up the tilt channel before measurement (See Section 2: SETUP->CHANNEL->EDIT TILT PLAN).
Please select at least four channels to test tilt, otherwise it will pop up a dialog box: Please select 4-16 tilt
channels!
The interface of tilt measurement is shown in Figure 3-38.
Figure 3-38
The level of tilt channel has two display formats: graph and list.
3.5.1 Operation
 LIST/TLIT Graph or List. Refer to Figures 3-38 and 3-39
Figure 3-39