System information

S7000 Series TV Analyzer Operation Manual
89
Main menu of satellite system is shown in Figure 4-1.
Figure 4-1
The function icons of the main menu are defined as follows:
Press keys (LEFT/RIGHT) to select the relevant function icons, and you can press key (ENTER) to enter
the relevant interfaces.
S7000 will display the satellite name in use on the title bar, as shown in Figure 4-1. ‘AP5’ is the satellite name in
use.
Before testing, users need to select the satellite first by press key (CH INFO) and the CH EDIT function is as
in Figure 4-2. Press F1 (SAT +) or F2 (SAT -) to switch satellite plans and also press F3 (TP +) or F4 (TP -) to switch
transponders.
In CH EDIT interface, user can only switch the satellite plans enabled in satellite list (See Section 2:
SETUP->CHANNEL->SATELLITE LIST).
---- Constellation diagram measurement
---- Spectrum analysis
---- Dish Align
---- DiSEqC
---- Measurement