User manual

Front and Rear Panel Illustration
1. Front Panel
1.LOOP OUT: This socket will bypass the RF signal to either your TV or
another video system.
2.TO TV:
3. LNB IN: This socket connects the LNB to your receive the signal.
4. CVBS: This socket outputs composite video signal.
5. Y/Pb/Pr:These sockets connect to your TV component input terminals.
6. L/R: This socket outputs analog audio L/R signal.
7. COAXIAL: This socket connects to a coaxial socket on your surround
sound system.
8. MAINS CABLE: This is used to connect to your main power supply.
Used to output RF signal for TV set.
1
2. Rear Panel
Remote Controller
Remote Key Function:
1. MUTE: Used to turn the sound on or off.
2. NUMBER KEYS: Used to select channel numbers or
input numbers in menus.
3. RECALL: Used to switch between the last two viewed
channels.
4. INFO: Used to display information about the channel
being viewed or further information about the program
when in small EPG screen.
5. SUBTITLE: Used to switch between different subtitles
that are broadcasted
6. EXIT: Used to return to the previous screen or menu.
7. CH+: Used to move around the menu screens or
selecting the channels in non-menu state.
8. VOL+:Used to move around the menu screens or
changing the volume in non-menu state.
9. OK: Used to confirm a selection within a menu.
10. RECLIST: Used to show the recorded programs list.
11. COLOR KEYS (RED/ GREEN/ YELLOW/ BLUE):
Used to operate different functions in TEXT screen or
other menus.
12. STOP: Used to stop PVR function.
13.TV/RADIO: Used to switch between TV channels and Radio stations.
14. RECORD: Used to record the program manually, and select the record duration if
pressed it again.
15. FAST FORWARD: Used to adjust the forward speed if in HDD time shifting
playback mode.
16.VIDEO MODE: Used to switch VIDEO output mode.
17.STANDBY: Used to switch the set top box to on or standby.
18. FAV: Used to switch access your favourite channels.
19. AUDIO: Used to set the sound output, the available settings are STEREO,LEFT,
RIGHT, MONO.
20. MENU: Used to open the main menu window.
21. EPG: Used to display information about the program being viewed and what's on next.
22. VOL-: Used to move around the menu screens or changing the volume in non-menu state.
23. CH- :Used to move around the menu screens or selecting the channels in non-menu state.
24. TEXT: Used to open teletext OSD display if teletext available in the broad caste stream.
25. PAUSE: Used to pause or playback the program being viewed .
26. FAST BACKWARD: Used to adjust the backward speed if in HDD time shifting
playback mode.
Note: SUBTITLE/TEXT/LANGUAGE may not be available for all channels.
RED/GREEN/YELLOW/BLUE may has specifical function in different menus.
3
1. LED DISPLAY: Used to display the time or channel information.
2. Standby Indicator: Used to visually show power state of the set
top box, the green LED will show if turned on the set top box and the
red LED will be light if the set top box entered standby mode.
3. REMOTE CONTROL SENSOR: Used to receive the signal from the
remote control.
4. USB JACK: Used to connect to an external USB 2.0 device.
4
1 2
3 4 5 6 7 8