User Guide

CHANGING FREQUENCIES

If you have more than one IR-to-UHF Pro Converter kit in your house,

or if you think you are experiencing interference from another source

(for example, another remote control), you can change the frequency of

the kit. The remote control included with your kit has a switchable key

at the bottom that matches the switch on the back of the converter.

Note: If using more than one UHF Pro remote control in your house,

make sure that the remote controls are set to different addresses from

each other.

1. Change the switch setting:

• If set on BLACK, change the switch to SILVER.

• If set on SILVER, change the switch to BLACK.

2. Slide the battery cover off.

3. Insert your thumbnail in the seam

between the remote control and the

key to separate the key from the

remote control.

4. Grasp the key at the bottom and pull down firmly to remove.

Pyramid.book Page 31 Wednesday, February 16, 2005 4:00 PM