User Guide

14
To identify the device code that your remote
control is using or to display the remote control
address, complete the following steps:
Press and hold the Mode button
for the device until all the Mode
buttons light up and then release.
The selected Mode button ashes.
To display the remote control
address, press and hold SAT until
all the Mode buttons light up and
then release. SAT ashes.
Press and release POUND (#)
twice.
The Mode button ashes
a number of times corresponding
to the value of the stored device
code. If Limited Mode is used, the
last ash represents Limited Mode.
For example, if the stored device
code is 593, the Mode button
ashes ve times, pauses, ashes
nine times, pauses, and ashes
three times. A quick ash is for
zero.
If SAT was pressed to display the
remote address, the SAT Mode
button ashes 1 to 28 times, giving
the remote address.
For AUX mode: The rst group of
ashes tells you what the AUX mode
controls, then the following ashes tell
you each digit of the device’s code.
— 0 for second TV
— 1 for second DVD/VCR/BD
— 2 for tuner, amplier, or audio
receiver
Record the stored device code in
the Reference Table on the inside
back cover.
3
2
1
4
Displaying Device Code and
Remote Address