58088_01_6.3 Guide_Cover.
158088_01_6.3 Guide_C-1.pdf 2/15/2008 10:07:43 AM Quick Setup 1 Confirm Your Receiver Model If your receiver looks like one of these... DISH Player-DVR 942 ViP222 & ViP622 DVR ViP722 DVR C M If your receiver looks like one of these... MY CY CMY K Select the Right Key Remote keys are included in this replacement remote kit. Keys have two sides. Look on both sides to find the right key for your remote.
158088_01_6.3 Guide_C-2.pdf 2/15/2008 9:28:38 AM Quick Setup 2 Install Your Selected Key Note: If you will be using the blue TV2 key that comes already installed in your remote, skip this step and proceed with the next step (Insert the Batteries). 1 2 3 A B 1 C M Y CM MY Pull the remote battery cover off. CY 1 Separate the key Insert face up from the remote the key you by inserting your selected on thumbnail or a coin the previous in the crease. page.
158088_01_6.3 Guide_C-3.pdf 2/15/2008 9:34:21 AM Quick Setup 4 Making the Remote Work With Your Receiver 1 If you installed one of these keys, continue with step 2 on this page. If you installed this key, go to page 11 inside this guide. UHF Pro Symbol Green (not black) C M Y CM MY 2 If you installed a UHF key, make sure the UHF antenna is installed on the back of the receiver. REMOTE ANTENNA CY CMY 4 K 3 Turn your receiver and TV on, and press SYSTEM INFO on the front of the receiver.
158088_01_6.3 Guide_C-4.pdf 2/15/2008 9:29:42 AM Quick Setup Program the Remote to Control Your TV C M 1 2 Turn your TV on. Press & hold the TV Mode button until all Mode buttons light up. 3 4 Y CM MY CY CMY Press POWER. Press the UP ARROW on the remote repeatedly (about 1 press per second) until your TV turns off. K 5 6 Press POUND. Press the POWER button to turn the TV on and try other buttons to make sure the code works. If you want to try another code, start over from step 1.
158088_01_6.3 Guide_C-5.pdf 2/15/2008 9:36:21 AM Quick Setup Programming the Recover Button for TV2 Operation For TV2 Remote Controls on DISH Player-DVR 522, 625, 942 and ViP222, ViP622 DVR, ViP722 DVR Receivers Programming your RECOVER button allows you to easily regain satellite programming if you accidentally change TV channels or inputs. C M Y CM MY CY CMY 1 2 Press & hold the TV Mode button until all Mode buttons light up. Press STAR.
158088_01_6.3 Guide_C-6.pdf 2/15/2008 9:30:12 AM Quick Setup/Operation Placing Your Remote in Limited Mode Limited Mode locks out all the TV mode operations except for TV power, Mute, and Volume. This prevents you from accidentally tuning away from satellite programming. 1 2 3 PAGE Press & hold the TV Mode button until all Mode buttons light up. Press the PAGE UP button. Press POUND. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.
158088_01_6.3 Guide_C-7.pdf 2/15/2008 9:35:19 AM Operation Remote Operation SAT Mode To use the features described in this section, make sure you are in SAT mode by pressing the SAT Mode button. SAT Note: Some features may not be available depending on your receiver model.
158088_01_6.3 Guide_C-8.pdf 2/15/2008 9:35:45 AM Operation Remote Operation TV Mode To use the features described in this section, make sure you are in TV mode by pressing the TV Mode button. Remote programming is required. See C-4 for instructions.
158088_01_6.3 Guide_C-9.pdf 2/15/2008 9:30:52 AM Operation Remote Operation VCR Mode VCR To use the features described in this section, make sure you are in VCR mode by pressing the VCR Mode button. You can use this mode to operate your DVD player instead of a VCR. Remote programming is required. See page 2 for instructions.
6.3 Notes Page.
6.3 TOC.fm Page 1 Friday, February 15, 2008 10:15 AM Table of Contents Quick Setup Confirm Your Receiver Model then Select the Right Key........................................................................................ C-1 Install Your Selected Key ...................................................... C-2 Insert the Batteries................................................................ C-2 Making the Remote Work with Your Receiver ...................... C-3 Program the Remote to Control Your TV .
6.3 Main Text.fm Page 1 Friday, February 15, 2008 10:17 AM REMOTE CONTROL OVERVIEW Use this full-function remote to control a variety of DISH Network receivers. Also, you can program the remote to control most of the popular brands of audio/video equipment like a TV, VCR, DVD player, or a second DISH Network satellite receiver. See Programming for Other Equipment on page 2. Note: This remote control may have features not used by your receiver.
6.3 Main Text.fm Page 2 Friday, February 15, 2008 10:17 AM If you program the remote to control other equipment, refer to the following for remote control operation instructions: • TVs, page C-8. • VCRs and DVD players, page C-9. • DISH Network satellite receivers, page C-7. • Stereo equipment uses only these buttons: SELECT (to change inputs), MUTE, VOLUME, and POWER.
6.3 Main Text.fm Page 3 Friday, February 15, 2008 10:17 AM and then repeat the instructions for the VCR using the same code. Put the remote in TV mode to use the TV, or VCR mode to use the VCR. LIMITED MODE You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in Limited Mode, you will only be able to use the POWER, MUTE, and VOLUME buttons to control your TV.
6.3 Main Text.fm Page 4 Friday, February 15, 2008 10:17 AM Instructions Additional Information 5 Enter one of the three-digit equipment codes from the table using the number buttons. The three-digit equipment code should be for the brand name of your equipment that you found in step 2. 6 If you want to program Limited Mode, press 1. If not, skip to step 7. See Limited Mode on page 3 for more information. 7 Press POUND (#). If you entered the code correctly, the mode button flashes three times.
6.3 Main Text.fm Page 5 Friday, February 15, 2008 10:17 AM Instructions 5 Additional Information 2 Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes. For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, TV will flash. 3 For AUX mode only. Press 0 for a second TV, 1 for a second VCR, or 2 for a tuner, or amplifier. Then press the STAR (*) button.
6.3 Main Text.fm Page 6 Friday, February 15, 2008 10:17 AM Instructions 8 If necessary, repeat this procedure until you’ve tried all the codes. Additional Information You may need to repeat the scan to find the best code for your equipment. SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROL When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume, even if your remote control is in SAT mode.
6.3 Main Text.fm Page 7 Friday, February 15, 2008 10:17 AM Control Amplifier Volume Control TV Volume 7 Press the plus (+) and minus (-) sides of the VOLUME button. 7 Press the plus (+) and minus (-) sides of the VOLUME button. 8 The equipment’s volume changes and the AUX mode button lights instead of the TV mode button. 8 The TV’s volume changes and the TV mode button lights instead of the AUX mode button.
6.3 Main Text.fm Page 8 Friday, February 15, 2008 10:17 AM READING OUT THE REMOTE CONTROL CODES These instructions explain how to check the remote control code you put in the remote control when you set it up. Be sure to write them in the spaces provided on the inside back cover. Instructions Additional Information 1 Press and hold the mode button for the equipment you want the remote to control.
6.3 Main Text.fm Page 9 Friday, February 15, 2008 10:17 AM DISCRETE CODES FOR LEARNING REMOTES Remote control discrete On and Off IR commands are used by installers when programming macro commands into universal remotes. Using an On-only or Off-only command is more effective than a toggle On/Off command when trying to ensure the satellite receiver is reliably in one state or the other.
6.3 Main Text.fm Page 10 Friday, February 15, 2008 10:17 AM 4 Press POUND (#). If you entered the address correctly, SAT will flash three times. Write down the number you entered in the space provided on the inside back cover. 5 Press RECORD. Make sure the Remote Address you see on the System Information screen is the same as the one you entered in step 3. If it isn't, the remote cannot control the receiver. Press RECORD a second time. 6 Select Done to close the System Information screen.
6.3 Main Text.fm Page 11 Friday, February 15, 2008 10:17 AM SETTING UP A TV1 UHF PRO REMOTE FOR THE DISH PLAYER-DVR 522 AND 625 ONLY Use these special instructions only if you are going to use the green 1 UHF Pro key to control the TV1 side of your DISH Player-DVR 522 or 625. When you are finished setting up the remote control, you’ll be able to operate the TV1 side of your DISH Player-DVR 522 or 625 from long distances. 1 Make sure the key is installed as described on pages C-1 and C-2.
6.3 Main Text.fm Page 12 Friday, February 15, 2008 10:17 AM 6 Use the ARROW buttons to move the highlight to the TV1 remote address (the Rem Addr box as shown below). This is important—if you do not move the highlight, your remote will change the receiver's TV2 remote address (the Rem Addr box) and cause your Remote Control 1 to control the TV2 side of your receiver. h i i Device Rem Addr 5 TV Ch Out 3 Note: Highlight the graphic above).
6.3 Codes.fm Page 13 Friday, February 15, 2008 10:19 AM EQUIPMENT CODES These tables contain the manufacturer codes for programming the remote to control your TV, a VCR, DVD player, or audio amplifier. Every attempt has been made to include all codes. If your equipment brand is not listed or if the codes do not work, the remote may not control your equipment. In some cases codes may operate some but not all buttons shown in this guide.
6.3 Codes.fm Page 14 Friday, February 15, 2008 10:19 AM TV CODES (CONTINUED) Jensen 556 573 652 654 JVC 508 557 559 642 649 655 676 726 735 736 737 812 817 Kawasho 548 561 573 652 654 Kenwood 506 573 652 654 656 Kloss 561 610 Kloss Novabeam 657 698 723 724 KTV 526 541 573 657 658 662 696 LG 653 766 Lloyds 627 Lloytron 526 Loewe 566 Logik 675 Luxman 523 652 654 LXI 563 566 590 595 617 631 635 645 646 650 654 683 691 701 725 M.
6.3 Codes.
6.3 Codes.
6.3 Codes.fm Page 17 Friday, February 15, 2008 10:19 AM VCR CODES (CONTINUED) Totevision 591 675 676 Unitech 675 Vector Research 534 592 600 Victor 561 562 600 Video Concepts 534 568 592 600 Videosonic 591 675 Wards 534 588 595 675 676 678 XR-1000 588 678 Yamaha 581 592 594 600 682 Zenith 500 501 533 779 DVD PLAYER CODES Programming in AUX mode: Use these codes to program in VCR mode; if programming in AUX mode, press 1 before entering the DVD Player code.
6.3 Codes.
6.3 Codes.fm Page 19 Friday, February 15, 2008 10:19 AM TV/DVD COMBO CODES Programming for combination equipment: Program the remote control in TV mode using the TV code and then in VCR mode (or AUX—press 1 before entering the DVD code) using the DVD code.
6.3 Codes.
6.3 Troubleshooting.fm Page 21 Friday, February 15, 2008 10:20 AM TROUBLESHOOTING What’s Happening What’s Wrong What You Can Do While performing a remote control procedure, the remote control stops working. If you don’t press a button for 20 seconds in a programming sequence, the remote shuts off its programming function. Start over again. You cannot find the key(s) shown on page C-1. The keys have two sides. Turn the keys over until you find the correct key.
6.3 Troubleshooting.fm Page 22 Friday, February 15, 2008 10:20 AM What’s Happening What’s Wrong What You Can Do • The remote control is in the wrong mode. • Make sure the remote control is in the correct mode. For example, if you want to use the satellite receiver, put the remote control in SAT mode (see Remote Control Modes on page 1). • You might be using the wrong remote control (TV1 or TV2).
6.3 Troubleshooting.fm Page 23 Friday, February 15, 2008 10:20 AM LIMITED WARRANTY This Limited Warranty is a legal document. Keep it in a safe place. Remember to keep your Sales Receipt for warranty service. We will consider any items you return without a copy of the Proof of Purchase to be out of warranty. This warranty extends only to the original user (“you,” “your”) of the DISH Network remote control and is limited to the purchase price of the remote control. EchoStar Technologies L.L.C.
6.3 Troubleshooting.fm Page 24 Friday, February 15, 2008 10:20 AM Advance Exchange Program The Advanced Exchange Program allows you to have a replacement remote shipped immediately to you. Depending upon where you live, the remote should arrive within 3 to 5 business days. You will not have to return your defective remote to DISH Network using this program. A shipping charge will be applied for shipping the replacement remote.
6.3 Troubleshooting.fm Page 25 Friday, February 15, 2008 10:20 AM REGULATORY FACTORS This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this device may void your authority to operate this equipment.
158088_01_6.3 Guide_Reference.pdf 2/15/2008 9:31:19 AM C M Y CM MY If you enter a “1” as the last number of your code, your remote is in Limited Mode (see page 3 for more details). CY CMY K To read out your remote codes, see page 8 for instructions.
6.3 Back Cover.
