User Guide

15
2. Press the POUND (#) button twice. The mode button
flashes the number for each digit of the device code, with
a pause between the groups of flashes. A quick flash is for
zero. For example, if the code is 570, the mode button
flashes five times, pauses, flashes seven times, pauses, and flashes
once quickly.
For AUX mode, the first group of flashes tells you what the AUX
mode controls. A quick flash (zero) before the three-digit code is
for a TV; one regular flash is for a VCR or DVD player; and two
flashes is for a tuner or amplifier. For example, if the TV code is
570, the AUX mode button flashes once quickly, pauses, flashes
five times, pauses, flashes seven times, pauses, and flashes once
quickly.
SWITCHING BETWEEN TV AND DEVICE VOLUME
C
ONTROL
When you set up the remote to control a TV, the MUTE and VOLUME
buttons control the TV volume. However, if you want to use the AUX
mode to control a tuner or amplifier and the device has a volume
setting, you can set up the remote to control the device’s volume
instead of the TV volume.
To set the remote to control the device’s volume:
1. Press and hold the AUX mode button
for three seconds, and then let go of it. The AUX mode
button will blink.
2. Press the POUND (#) button.
3. Press the plus (+) side of the VOLUME
button.
4. Press the 0 number button.
5. Press the POUND (#) button.
The AUX mode button flashes three times.
6. Press the SAT mode button.
Pyramid.book Page 15 Wednesday, February 16, 2005 4:00 PM