User Guide

3
INTRODUCTION
The IR-to-UHF Pro Upgrade Kit lets you use an ultra-high frequency
(UHF) remote to control an infrared (IR) DISH Network satellite TV
receiver from much farther away than with an IR remote control, even
through walls that block IR signals.
Note: The remote control/converter combination included in this kit
works only with compatible DIS H Network receivers, and is not for
any other devices. Compatible DISH Network receivers include all
models except Model 7100/7200 (DISHPlayer), Model HM-
DSR100RU (JVC-DVHS), Model 2000, Model 4000, and Model
5000. The UHF Pro remote can control other devices (a TV, for
example) at short distances because it sends IR signals to such devices.
After you set up the kit, when you press any button on the UHF Pro
remote control, the remote control sends a UHF signal to the converter.
Figure 1. UHF Pro Remote Control sends signals to the Converter
Because the UHF signal can go through walls and other objects on its
way to the converter, you can use the UHF Pro remote control in any
room.
Figure 2. UHF Pro signals go through walls and other objects
Pyramid.book Page 3 Wednesday, February 16, 2005 4:00 PM