User Guide

5
SETTING UP THE KIT
The kit includes a UHF Pro remote control, batteries, an IR extender
cable, an IR clip, an AC adapter, a converter, and a UHF antenna.
Figure 4. Parts of the IR-to-UHF Pro Upgrade Kit
SETTING UP THE SIGNAL CONVERTER
1. Make sure you fully install the satellite TV system. See the satellite
receiver’s User Guide.
2. Select a location for the converter that has access to a 110 V power
outlet and is close enough for the IR extender cable to reach the
satellite receiver.
3. Refer to Figure 5 to complete steps a through d.
Figure 5. Converter Back Panel
a. Attach the antenna to the REMOTE ANTENNA
on the back of the converter. You may need to
move the antenna around to find where it
works best.
Pyramid.book Page 5 Wednesday, February 16, 2005 4:00 PM