User manual Dishwasher DX 203
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Select and start a washing program _ _ _ _ _ _ _ 2 3 4 5 5 6 7 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 What to do if… _
• A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are damaged so that you can get access to the inner side of the appliance. Contact your local Customer Care Centre.
Follow these steps to set the Button Lock function: 1. Switch on the appliance. 2. Set a washing program. 3. Start the washing program. 4. Press Button Lock for approximately 5 seconds, or until the Button Lock indicator light flashes. 5. Button Lock indicator light flashes for approximately 15 seconds. 6. When Button Lock function is active the indicator light is on with a static light.
Consumption values Program Duration (in minutes) Energy (in kWh) Water (in litres) Pots 110 - 120 1,8 - 2,0 23 - 25 Regular Plus 95 - 105 1,4 - 1,6 19 - 21 Quick 30 30 0,9 9 Regular Eco 90 - 95 0,8 - 0,89 11 - 12 Rinse & Hold 12 0,1 4 The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to specified instructions for each step of the procedure. 1.
Wash hands to remove any residue of rinse aid from skin. Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There can cause damage to the appliance. Adjusting the rinse aid dosage AX + M 1 2 3 4 The rinse aid is set at the factory at position 3. To increase or decrease the dosage refer to 'What to do if...
Maximum height of the dishes in : Lower position upper basket lower basket 24 cm 27 cm 1 2 Arrange the items to let For longer items, fold the water touch all surfaces. cup racks up. Prevent to put plates in the first three sectors in the front part of the basket. Make sure the plates tilt forward. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to a upper position. Warning! Adjust the height before you load the upper basket.
best cleaning results during short washing programs. Use long washing programs when you use detergent tablets to fully remove the detergent. Use of combi detergent tablets 3 Fill the detergent dispenser (A) with detergent. 5 4 If you use a washing program with prewash phase, put more detergent in the prewash detergent compartment (B). 6 These products are detergents with a combined cleaning and rinsing functions. They can contain also other cleaning agents.
Fill the detergent dispenser with detergent before you set a new washing program. Select and start a washing program with delay start – When you cancel delay start, you also cancel the washing program. 2. Set a new washing program. End of the washing program 1. Press the on/off button. 2. Set a washing program. 3. Press the delay start button until the indicator light related to 3 or 6 hours comes on. 4. Close the door. – The countdown starts.
tergents. Do not use abrasive products, scouring pads or solvents (acetone etc.). Internal cleaning Do an inspection at intervals of 3 months. Set a washing program for heavily soiled dishes. Use detergent, but do not put dishes in the appliance. Long periods of non-operation 3 To remove filters B and C, turn the handle approximately 1/4 anticlockwise. 4 Remove the flat filter A from the bottom of the appliance. Do these steps when you do not use the appliance for a long period: 1.
Fault code and malfunction Possible cause and solution • The running program light continues to flash • The 'Finished' indicator light flashes once The appliance does not fill with water • The water tap is blocked or restricted with limescale. Clean the water tap. • The water tap is closed. Open the water tap. • The filter in the water inlet hose is blocked. Clean the filter. • The installation of the water inlet hose is not correct. The hose can be kinked or squashed.
The cleaning results are not satisfactory There are streaks, milky spots or • Decrease the rinse aid dosage. a bluish coating on glasses and dishes Dry water drop stains on glasses • Increase rinse aid dosage. and dishes • The detergent can be the cause. Technical data Dimensions Width (mm) 596 Height (mm) 850 Depth (mm) 610 Electrical connection - Voltage Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
Installation Fitting under a counter Adjusting the level of the appliance Warning! Make sure that mains plug is disconnected from the mains socket during installation. Make sure that the appliance is level to close and seal the door correctly. If the level of the appliance is correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level. Put the appliance adjacent to a water tap and a water drain.
The water pressure must be in the limits (refer to 'Technical data'). Make sure that the local water authority gives you the average mains pressure in your area. Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Fit the hose nut correctly to prevent water leaks. The appliance has a security feature to prevent dirty water going back into the appliance.
Always plug the mains plug onto a correctly installed approved socket. Do not use multi-ways plugs, connectors and extension cables. This can constitute a fire hazard through overheating. If necessary, have the domestic wiring system socket replaced. If the mains cable has to be replaced, contact your local Customer Care centre. The mains plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug. Test the appliance.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND This document sets out the terms and conditions of product warranties for Electrolux branded appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Electrolux appliance. General Terms and Conditions 1.
governed by the law applicable in the Australian State where the Appliance was purchased or the law applicable in New Zealand if the Appliance was purchased in New Zealand. Where the Appliance was purchased in New Zealand for business purposes the Consumer Guarantee Act does not apply. Limitation of Liability 10.
www.electrolux.com www.dishlex.com.