User manual Dishwasher DX 301
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programs _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Select and start a washing program _ _ _ _ _ _ _ _ 11 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• Keep all detergents in a safe area. Do not let children touch the detergents. • Keep children and pets away from the appliance when the door is open. Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation.
Control panel 1 2 3 4 5 6 On/off button Button Lock Program selection buttons Delay start button Indicator lights Digital display Indicator lights Washing The indicator light comes on when the washing phase or the rinsing phase operates. Drying The indicator light comes on when the drying phase operates. Finished The indicator light comes on when the washing program is completed. Rinse Aid The indicator light comes on when it is necessary to fill the rinse aid container.
Follow these steps to set the Button Lock function: 1. Switch on the appliance. 2. Set a washing program. 3. Start the washing program. 4. Press Button Lock for approximately 5 seconds, or until the Button Lock indicator flashes. 5. Button Lock indicator flashes for approximately 15 seconds. 6. When Button Lock function is active the indicator is on with a static light. If you press a button while Button Lock function is on, the display shows CL to inform you that the buttons are locked.
Washing programs Washing programs Program Degree of soil Type of load Program description Pots Heavy soil Crockery, cutlery, pots Prewash and pans Main wash up to 70°C 2 intermediate rinses Final rinse Drying Auto 1) Any Crockery, cutlery, pots Prewash and pans Main wash up to 50°C or 65°C 1 or 2 intermediate rinses Final rinse Drying Quick 30 2) Normal or light soil Crockery and cutlery (Partial load) Main wash up to 60°C Final rinse Regular Eco 3) Normal soil Crockery and cutlery Prewash
The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to specified instructions for each step of the procedure. 1. Fill the rinse aid dispenser with rinse aid. 2. Load cutlery and dishes into the appliance. 3. Set the correct washing program for the type of load and soil. 4. 5. Fill the detergent dispenser with the correct quantity of detergent. Start the washing program.
– Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base. – Make sure that cutlery and dishes do not lie inside one another. – Make sure that cutlery and dishes do not cover other cutlery and dishes. – Make sure that glasses do not touch other glasses. – Put small objects in the cutlery basket. • Plastic items and pans with non-stick coatings can retain water droplets.
Maximum height of the dishes upper basket lower basket Upper position 20 cm 31 cm Lower position 24 cm 27 cm Follow these steps to move the upper basket to the upper position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides until the mechanism is engaged and the basket is stable. Follow these steps to move the upper basket to the lower position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides upwards. 3. Hold the mechanism and guide it back down slowly.
5 6 Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs. Use long washing programs when you use detergent tablets to fully remove the detergent. Use of combi detergent tablets These products are detergents with a combined cleaning and rinsing functions. They can contain also other cleaning agents. 10 Refer to the instructions from the manufacturer for the use of these products.
Select and start a washing program Set the washing program with the door ajar. The washing program only starts after you close the door. Until then it is possible to modify the settings. 1. 2. 3. 4. Press the on/off button. Make sure that the appliance is in setting mode. Press one of the program buttons. Refer to the 'Washing programs' chart for program details. – The program indicator light comes on. – The Washing indicator light comes on. – The flashing digital display shows the program duration.
• There can be water on the sides and door of the appliance. Stainless steel becomes cool more quickly than the dishes. Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters Important! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. Incorrect installation will cause unsatisfactory washing results and damage to the appliance. 5 Put the filter A in the bottom of the appliance.
If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose. Moving the machine 1. 2. 3. 4. Disconnect the mains plug from the mains socket. Close the water tap. Remove the appliance and the hoses. Do not tilt the appliance during transport. Do these steps to move the appliance: What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself.
Malfunction Fault code Possible cause The delay start is set. After the check, switch on the appliance. The program continues from the point of interruption. If the malfunction shows again, contact your Customer Care Centre. If the display shows a fault code, not described in the chart, contact your Customer Care Centre. These data are necessary to help you quickly and correctly: For these data, refer to the rating plate.
Technical data Dimensions Width (mm) 596 Height (mm) 850 Depth (mm) 610 Electrical connection - Voltage Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door. Water supply pressure Minimum 50 kPa (7 psi) Maximum 800 kPa (116 psi) Capacity Place settings 12 Environment concerns The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g.
Installation Fitting under a counter Adjusting the level of the appliance Warning! Make sure that mains plug is disconnected from the mains socket during installation. Make sure that the appliance is level to close and seal the door correctly. If the level of the appliance is correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level. Put the appliance adjacent to a water tap and a water drain.
The water pressure must be in the limits (refer to 'Technical data'). Make sure that the local water authority gives you the average mains pressure in your area. Make sure that there are no kinks in the water inlet hose and that the water inlet hose is not squashed or entangled. Fit the hose nut correctly to prevent water leaks. Caution! Do not connect the appliance to new pipes or pipes that have been not used for a long time. Let the water run for some minutes, then connect the inlet hose.
The mains plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug. 18 Test the appliance. Run a quick washing program and ensure that the appliance fills with water, washes and drains with no leaks. The manufacturer accepts no liability for failure to observe the above safety precautions.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: DISHWASHER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
– misuse or abuse, including failure to properly maintain or service – normal wear and tear – power surges, electrical storm damage or incorrect power supply – incomplete or improper installation – incorrect, improper or inappropriate operation – insect or vermin infestation – failure to comply with any additional instructions supplied with the Appliance; b) the Appliance is modified without authority from Electrolux in writing; c) the Appliance’s serial number or warranty seal has been removed or defaced;
FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand Free call 0800 10 66 10 (New Zealand only) SERVICE NEW ZEALAND ELECTROLUX HOME PRODUCTS www.electrolux.co.
www.electrolux.
