User manual

Malfunction Fault code Possible cause Possible solution

The delay start is set. If you want to cancel the de-

lay start, refer to 'Select and

start a washing program'.

After the check, switch on the appliance. The program

continues from the point of interruption. If the malfunc-

tion shows again, contact your Customer Care Centre.

If the display shows a fault code, not described in the

chart, contact your Customer Care Centre.

These data are necessary to help you quickly and cor-

rectly:

For these data, refer to the rating plate.

Write the necessary data here:

Model (MOD.) ....................

Product number (PNC) ....................

Serial number (S.N.) ....................

The cleaning results are not satisfactory

The dishes are not clean • The selected washing program is not applicable for the type of load and

soil.

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

• Spray arms do not turn freely because of incorrect arrangement of the

load.

• The filters are dirty or not correctly installed.

• The quantity of detergent is too little or missing.

The dishes are wet and dull • No rinse aid has been used.

• The rinse aid dispenser is empty.

There are streaks, milky spots or

a bluish coating on glasses and

dishes

• Decrease the rinse aid dosage.

Dry water drop stains on glasses

and dishes

• Increase rinse aid dosage.

• The detergent can be the cause.