User manual

Malfunction Fault code Possible cause Possible solution

The fuse has blown out in the

household fuse box

Replace the fuse.

The delay start is set. If you want to cancel the de-

lay start, refer to 'Select and

start a washing program'.

After the check, switch on the appliance. The program

continues from the point of interruption. If the malfunc-

tion shows again, contact your Customer Care Centre.

If the display shows a fault code, not described in the

chart, contact your Customer Care Centre.

These data are necessary to help you quickly and cor-

rectly:

For these data, refer to the rating plate.

Write the necessary data here:

Model (MOD.) ....................

Product number (PNC) ....................

Serial number (S.N.) ....................

The cleaning results are not satisfactory

The dishes are not clean • The selected washing program is not applicable for the type of load and

soil.

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

• Spray arms do not turn freely because of incorrect arrangement of the load.

• The filters are dirty or not correctly installed.

• The quantity of detergent is too little or missing.

The dishes are wet and dull • No rinse aid has been used.

• The rinse aid dispenser is empty.

There are streaks, milky spots or

a bluish coating on glasses and

dishes

• Decrease the rinse aid dosage.

Dry water drop stains on glasses

and dishes

• Increase rinse aid dosage.

• The detergent can be the cause.