User Manual

Attach the Front Wheels

1. Using the hex wrench, remove the nut from the axle. Then remove the

small washer. Note: Leave the large washer on the axle.

2. Slide the wheel spacer onto the front axle.

3. Slide the front wheel all the way onto the axle until it meets with the

wheel spacer.

4. Slide the second spacer over the axle until it meets the wheel.

5. Align the tabs on the hubcap with the slots in the wheel. Press the

hubcap into the wheel until it snaps into place.

6. Slide the small washer onto the axle.

7. Place the nut onto the end of the axle and tighten with the hex wrench.

8. Line up the tabs on the wheel cap with the slots in the Hubcap. Press the

wheel cap into place on the hubcap.

9. Repeat steps 1-8 for the remaining front wheel.

Small

Washer

Wheel

Cap

Hub

Cap

6 85

Large

Washer

Spacer

Nut

Wheel

Hex

Wrench