User Manual

Attach the Rear Wheels

1. Slide a washer onto the left rear axle, or the side without the motor

and gearbox.

2. Slide the wheel spacer onto the axle until it meets the washer.

3. Slide the rear wheel all the way onto the axle until it meets with the

wheel spacer.

4. Slide the second spacer over the axle until it meets the wheel.

5. Align the tabs on the hubcap with the slots in the wheel. Press the

hubcap into the wheel until it snaps into place.

6. Slide the second washer onto the axle.

7. Place the nut onto the end of the axle and tighten with the hex wrench.

8. Align the tabs on the wheel cap with the slots in the hubcap. Press the

wheel cap into the hubcap until in snaps into place.

9. Repeat steps 1-8 for installing the right rear wheel.

Washer

Wheel

Cap

Hub

Cap

7 9 5

Spacer

Nut

Wheel

Hex

Wrench