Instructions / Assembly

1
WARNING: READ AND
UNDERSTAND ALL
INSTRUCTIONS.
Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
WARNING:
ELECTRIC PRODUCT.
Keep away from children. Not recom-
mended for children under 3 years of age. As with all electrical
products, precautions should be observed during handling and
use to reduce the risk of electric shock. If the supply cord is dam-
aged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Adults Note: Periodically examine this product for damage to
the cord, housing or other parts that may result in the risk of fire,
electric shock or injury. If the product is damaged, do not use it.
DANGER
–
To prevent electric shock, do not immerse in water;
wipe clean with damp cloth. Immersing this product can result in
an electric shock.
IMPORTANT SAFETY
INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS , BASIC
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
1. This is an electrical product - not a toy! To avoid risk of fire,
burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
2. Do not use products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
3. This product is not intended for permanent installation or use.
4. Do not mount or place near gas or electric heaters, fireplaces,
candles, or other similar sources of heat.
5. Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
7. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
8. Do not use this product for other than its intended purpose.
9. Do not hang ornaments or other objects from cord, wire, or
light string.
10. Do not close doors or windows on the product, or extension
cords, as this may damage the wire insulation.
11. Do not cover the product with a cloth, paper, or any material
not part of the product when in use.
12. Do not place the product against carpeting, furniture, or any
other fabric when in use.
13. Read and follow all instructions that are on the product or
provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
1. When the product is placed on a live tree, the tree should be
well maintained and fresh. Do not place on live trees in which
the needles are brown or break off easily. Keep the tree holder
filled with water.
2. If the product is placed on a tree, the tree should be well
secured and stable.
3. Before using and reusing, inspect the product carefully. Discard
any products that have cut, damaged or frayed wire insulation
cords, cracks, lamp holders or enclosures, loose connections,
or exposed copper wire.
4. When storing the product, carefully remove the product from
wherever it is placed, including trees, branches, or bushes, to
avoid any undue strain or stress on the product conductors,
connections and wires.
5. When not in use, store neatly in a cool, dry location protected
from sunlight.
Congratulations! You’re the proud owner of a
Gemmy Airblown
®
Inflatable. Please read over
the directions carefully before using your Gemmy
Airblown
®
Inflatable.
CONTENTS
Airblown
®
Inflatable 1 piece
UL-listed power supply: 1 piece
Tethers 2 pieces
Stakes 4 pieces
GENERAL INSTRUCTIONS
1. Remove contents from packaging.
2. Remove all plastic fasteners and tags. These are part of the
packaging and should be discarded.
3. Connect adapter into connection of fan, plug adapter into
standard wall outlet.
4. Fan will immediately begin to start the flow of air.
5. Zip zipper at base of fan. Airblown
®
will then fully inflate.
6. Using the loops attached at the bottom of the Airblown
®
,
insert stakes into the ground.
7. Attach tethers to the Airblown
®
.
8. Insert the stakes into the ground so the tethers are taut.
9. Your Airblown
®
is weighted at the base with a sealed weight-
bag. Adjust weight-bag to position your Airblown
®
as desired.
10. To deflate, unplug adapter. For faster deflation, unzip zipper
after unplugging adapter. Do not unplug by pulling on cord.
This power unit is intended to be correctly orientated in a
vertical or floor mount position.
WARNING
Remove all plastic fasteners and tags. These are part of the
packaging and should be discarded.
For indoor and outdoor use.
This item is not a toy. For decorative purposes only.
TROUBLE SHOOTING CHECKLIST
If your Airblown
®
Inflatable is not inflating, the problem may be:
1. The power source is disabled or the cord may be unplugged.
2. The zipper may not be securely fastened, sealing the
Airblown
®
Inflatable and preventing air from escaping.
3. Something may be blocking the fan’s air intake.
NOTE: ONCE FAN IS UNPLUGGED AND STOPS BLOWING,
YOUR Airblown
®
Inflatable WILL DEFLATE.
The lights within Airblown
®
are powered by LED lights which are
designed to operate longer than traditional bulbs, These LED
lights are not replaceable.
OUTDOOR
INSTRUCTIONS
9-E
Input: 120V ~ 60Hz
Output: 12.0V 1000mA