Toddler to Twin Carriage Bed BB86983PS Toddler Bed • BB87191PS Twin Bed WARNING: THIS ITEM REQUIRES ASSEMBLY BY AN ADULT BECAUSE OF SMALL PARTS. CARE SHOULD BE TAKEN IN UNPACKING AND ASSEMBLY OF THIS PRODUCT.
Toddler Bed Parts: HARDWARE SET FOUND IN TODDLER BED BOX A TO FULLY ASSEMBLE THE TODDLER BED YOU WILL NEED G C H BENCH PARTS E (2) Side Panel Female S (2) Side Rail Connector Straps 4 x 1.
Stickers • Please apply all stickers on individual parts before assembly. • For best results, place individual parts on a flat surface before applying stickers and acrylic jewels.
Canopy Drapings P (1 Center Draping) O Q (1 Left Side Draping) (1 Right Side Draping) 4
1 Apply all decals A C A1 A2 A3 E5 x 2 E5 A2 x 6 B1 C1 B2 B E E6 E1 D C2 C2 x 6 E5 x 2 F E5 E C3 E6 F D F1 D1 E7 E4 E7 F1 D1 F1 D1 D1 E7 E2 E7 F1 E3 Alternate Headboard Decal 5
2 Assemble Bench 2A 2B G I H • Make sure seat is all the way to the front and screwholes on sides line up • Align seat with slots in bench sides • Slide into place 2C • Turn flap down so it sits flat across the back of the seat.
3 Toddler Bed Assembly 3B C 3A A 4 x 1” • Insert Panel C into Panel A for both sides • Insert Panel E latch hooks into both left/right side panel grooves • Slide downward into a fully locked position 3D E 1 2 E 3C 4 x 1.
3E • Align bench to footboard (Panel E) 3F 8
3G 3H PLEASE NOTE: Straps are only to keep bed sides taut. They are NOT a mattress support. R S R This is NOT a screwhole. Do not use. R 4 x .
3I 3J Skip to Section 6 for Fabric Bin setup 10
4 Twin Bed Assembly • 1) Insert Panel B into Panel A for both sides 4B • 2) Insert Panel C into Panel B for both sides C B A 2 8 x 1” 4A 1 4D D 4C F E • Insert Panel D into Panel E • Insert Panel F into Panel E 8 x 1” 11
4E 4F 1 2 • Insert Panel F latch hooks into side Panel C grooves for both sides • Insert Panel D latch hooks into side Panel A grooves for both sides 4 x 1.
• Align pole top with pole base 4H 4I 4 x .5” 4 x 1” • Align pole base with slots in side panels 4J 4K 4 x .5” 4G • Slide into place until poles are flush with sides 4 x 1.
4L 4M • Align bench to footboard (Panel E) 14
4N 4O PLEASE NOTE: Straps are only to keep bed sides taut. They are NOT a mattress support. R S This is NOT a screwhole. Do not use. R R 4 x .
4P 4R 4Q Go to Section 5 to attach canopy draping 16
5 Canopy Draping 5A 5B J 5C P O Q • Attach top of Drape O to top of (1st) Pole J with velcro close • Attach middle of Drape O to top of (1st) Pole J with velcro close • Repeat both steps to attach Drape R to (2nd) Pole J. • Attach to Drape O with velcro close. • Then attach to Drape P with velcro close. • Fluff fabric on Drapes O and Q to adjust fall of fabric to finish.
6 Fabric Storage Bin 6A 6B N M M • Fully expand Fabric Bin • Insert Bin Base (N) to stabilize.
TODDLER BED WARNING WARNING INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50lbs (22.7kg) WARNING STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a child. NEVER suspend strings over a bed.
