User’s Guide CD Boombox Manual del Usuario Caja de Resonancia para CD Guide d'utilisation Radio à lecteur CD DB3050-C
QUICK REFERENCE The Quick Reference guide is given to provide basic operation of the unit. Please completely read the user’s guide to take advantage of all the features this unit has to offer.
QUICK REFERENCE (CONTINUED) TO LISTEN TO THE RADIO: 1. Press the Power button to turn the unit on. 2. Slide the FUNCTION switch to select AM or FM. 3. Tune a desired station by rotating the TUNING control. 4. Adjust the VOLUME control as desired. 5. To turn the radio off, press the Power button. TO PLAY A CD: 1. Press the Power button to turn the unit on and insert a CD. 2. Slide the FUNCTION switch to the CD position. 3. Press the PLAY/PAUSE (®p) button to start playback. 4.
Dear Customer, Please read this manual thoroughly before operating the unit to become more familiar with it and obtain the performance that will bring you continued enjoyment for many years. Keep these instructions handy for future reference. For future reference, record the serial number of the unit printed on the rear of the cabinet.
INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
IMPORTANT SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3.
IMPORTANT SAFETY INSTRUCTIONS 15. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product. 17.
LOCATION OF CONTROLS 1 2 13 3 14 4 5 6 7 8 9 10 15 16 17 18 19 11 12 20 12. 13. 14. 15. 16. 17. 18. 19. 20. 1. 2. 3. FM Antenna Left Speaker FUNCTION(AM/FM/CD) Switch 4. TUNING Control 5. Display 6. Skip/Search o Button 7. STOP (■) Button 8. REPEAT Button 9. CD Door Open/Close Area 10. AC Power Jack (Rear of Unit) 11.
POWER SOURCES This unit is designed to operate on AC household current or DC (batteries). AC Use the AC polarized line cord included with the unit for operation on AC power. Insert one end of the AC line cord into the AC power jack on the rear of the unit and the other end (with the 2 blades) into a conveniently located AC outlet having 120V, 60Hz. When the AC cord is plugged in, the batteries will AC Outlet be disconnected.
CHANGING THE DISNEY FACEPLATE 1 2 Press the Open/Close Area to open the CD Compartment. Press in on the two tabs inside the CD door. 3 4 Gently pull the lid off. Remove the faceplate which located at the top of the CD door.
CHANGING THE DISNEY FACEPLATE (CONTINUED) 5 6 Position at Edge Insert another Disney faceplate or insert your own photograph. Make sure the faceplate or photograph are located inside the positioning edge. To replace the lid, insert the tab into the bottom hole of the CD door. 7 8 Faceplate Tabs Press in on the two tabs at the top of the lid and push the lid to complete insertion. Then position the two tabs at the left and right sides of the lid into the left and right CD compartment holes.
OPERATION LISTENING TO THE RADIO 1 2 Press the POWER button to turn the unit on. Slide the FUNCTION switch to the AM or FM position to select a band. 3 4 Rotate the TUNING control to select a station. When an FM stereo station is tuned in, the FM stereo indicator will appear in the display. If the station is not broadcast in stereo or the reception is not strong enough, the FM stereo indicator will not appear in the display. Adjust the VOLUME control as desired.
OPERATION (CONTINUED) TO PLAY A CD 1 2 2 1 Press the POWER button 1 to turn the unit on. Slide the FUNCTION switch 2 to the CD position to select CD. Open the CD compartment door by pressing the CD Door Open/Close Area. Place a CD on the center spindle, with the printed label side facing front. Close the CD compartment door. 3 4 2 1 Press the PLAY/PAUSE (®p) button 1 to start playback on the first track; “PLAY” will appear in the display. Adjust the VOLUME control 2 as desired.
OPERATION (CONTINUED) TO PLAY A CD (CONTINUED) 7 8 When the disc is through playing, it will stop rotating. Press the STOP (■) button to stop the disc before it is finished. To turn the unit off, press the POWER button again. NOTES: • If a disc is inserted incorrectly, dirty or damaged, it will not play, "00" will appear in the display. • As each track is played, the track number is shown in the display. • To prevent damage to the disc, never open the CD door while the disc is rotating.
OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 30 TRACKS) 1 2 1 2 With the power on and the unit in the Stop mode, press the PROG button; “PRG” and “01” will blink in the display. Use the Skip/Search o 1 or n 2 button to select the first track to be programmed. 3 4 1 2 Repeat steps 2 and 3 to program the other desired tracks in sequence, up to 30 tracks. After you attempt to program more than 30 tracks, the program memory will be full.
OPERATION (CONTINUED) NOTES ON PROGRAMMED PLAY: • Programming is the ability to preselect the order in which a series of tracks will be played. • Each track may be stored in the program memory as many times as desired. • As each track is played, its track number will be displayed. You can move forward or backward through the programmed tracks with the Skip/Search o or n button. • The CD player will stop after all programmed tracks have been played or the STOP (■) button is pressed.
CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. Disc will not play. CAUSE AC cord not connected. CD compartment door not closed. Disc inserted SOLUTION Check AC cord connection. Close CD compartment door. Reinsert disc correctly. incorrectly. Dirty or defective CD. Try another disc. Moisture condensation on disc. No sound. Volume is set to minimum. Defective disc. Erratic playback.
SPECIFICATIONS GENERAL: Power Source...........................................................120V, 60Hz AC Batteries.......................................9V DC (6 x 1.5 ‘C’ size batteries) Alkaline is recommended for longer life Speaker .................................................................................2 x 3W Audio Power Output ...........................................................2 x 1.5W RADIO SECTION: Frequency Range (FM) .................................................
For additional set-up or operating assistance, please visit our website at www.disneyelectronics.com or contact customer service at (954) 660-7026. Please keep all packaging material for at least 90 days in case you need to return this product to your place of purchase or Memcorp. For parts and accessories, contact Fox International at 1-800-321-6993. Distributed by Memcorp Inc., Weston, FL, Disney Elements © Disney 2005.
