Display Elektronik GmbH LCD STANDARD PANEL DE 113 - SERIES Product specification Version :1 10.09.
GENERAL SPECIFICATION MODULE NO. : DE 113 - SERIES CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 06.12.2006 1 ADD VERSION 10.09.2010 PREPARED BY: MHO APPROVED BY: MH DATE: 10.09.2010 DATE: 10.09.
DE 113 - SERIES Product Specification CONTENTS 1. GENERAL FEATURES---------------------------------------------------------------------- 2 2. ORDERING INFORMATION--------------------------------------------------------------- 2 3. MODEL TYPES------------------------------------------------------------------------------- 2 4. MECHANICAL SPECIFICATIONS-------------------------------------------------------- 3 5. PIN ASSIGNMENT--------------------------------------------------------------------------- 3 6.
DE 113 – SERIES Product Specification 1. GENERAL FEATURES Display Elektronik GmbH is specialized in LCD-products. - There is a wide range of standard lcd-panels. Most of them are available from stock. - Most of our standard panels operate within the extended temperature range (–20°C to +70°C). - For the static types the Vlcd is ready for 3 Volt, like shown in the following table. For most of our multiplexed standard panels we offer a 3Volt and a 5Volt model.
DE 113 – SERIES Product Specification 16,90 4. MECHANICAL SPECIFICATIONS 5.
DE 113 – SERIES Product Specification 6. ELECTRICAL AND PHYSICAL PROPERTIES 7. APPLICATION NOTE 8.
DE 113 – SERIES Product Specification 9. CONNECTING LCDs - Fixed pins have a typical pitch of 2,54mm. (Pls refer to mechanical specification). - LCD for elastomeric connectors (zebras) may have thighter pitches. Please regard tolerances and pitch of elastomer connector. 10. SOLDER CONDITIONS FOR LCD WITH FIXED PINS min. typ. max. Solder temperature t.b.d. ~ 235°C 260°C Solder duration t.b.d. 2 seconds 5 seconds 6mm t.b.d. Distance to glass substrate 4mm t.b.d. – to be discussed ! 11.
