DISPLAY Elektronik GmbH LCD MODULE DEM 16210 SGH (FPCR) Product specification Version : 5 04/Jan/2005
GENERAL SPECIFICATION MODULE NO. : DEM 16210 SGH (FPCR) CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 16/06/2000 1 CHANGE PITCH DIMENSION 28/06/2000 2 ADDING FPC ADDING ELECTRO-OPTICAL CHARACTERISTICS CHANGED MODULE DRAWING AND FPC DRAWING CHANGE TEMPERATURE RANGE 24/10/2000 3 4 5 PREPARED BY: 11/01/2003 07/08/2004 04.01.
DEM 16210 SGH (FPCR) Product Specification CONTENTS 1. FUNCTIONS & FEATURES --------------------------------------------------------------------2 2. MECHANICAL SPECIFICATIONS------------------------------------------------------------2 3. EXTERNAL DIMENSIONS ---------------------------------------------------------------------2 4. BLOCK DIAGRAM------------------------------------------------------------------------------3 5.
DEM 16210 SGH (FPCR) Product Specification 1. FUNCTIONS & FEATURES z MODULE - Series LCD Type : MODULE DEM 16210 SGH (FPCR) z z z z z z z z LCD MODEL STN Grey Viewing Direction Driving Scheme Power Supply Voltage VLCD Operating Temperature Storage Temperature Display Contents Interface LCD TYPE Reflective Positive Mode : 6 o’clock : 1/16 Duty Cycle, 1/5 Bias : 5.0 Volt (typ.) : 4.5 Volt (typ.) : -20°C…+70°C : -30°C…+80°C : 16 x 2 Characters : Parallel (8-bit) 2.
DEM 16210 SGH (FPCR) Product Specification 4. BLOCK DIAGRAM VSS V5 VDD RS R/W E DB0~DB7 LCD PANEL LCD Controller NT7603 COM1~COM16 2 x 16 Characters SEG1~SEG80 5. PIN DESCRIPTION Pin No.
DEM 16210 SGH (FPCR) Product Specification 7. MAXIMUM ABSOLUTE LIMIT Characteristic Power supply voltage Power supply voltage Input voltage Symbol VDD V5 VI Value -0.3 to+7.0 0 to VDD+0.3 -0.3 to VDD+0.3 Unit V V V Operating temperature Topr -20 to +70 °C Storage temperature Tstg -30 to +80 °C *NOTES: All the voltage levels are based on VSS = 0V. 8.
DEM 16210 SGH (FPCR) Product Specification 8-2. AC Characteristics 7-2-1. Read Cycle (VDD=5.0V, GND=0V,Ta=25°C). Characteristic Symbol Min Typ.
DEM 16210 SGH (FPCR) 8-2-2. Write Cycle Product Specification (VDD=5.0V, GND=0V,Ta=25°C) Characteristic Symbol Min Typ.
DEM 16210 SGH (FPCR) Product Specification 9.
DEM 16210 SGH (FPCR) Product Specification 10.
DEM 16210 SGH (FPCR) Product Specification 11. FPC DIMENSIONS 12.
DEM 16210 SGH (FPCR) Product Specification 13. PAD CONFIGURATION AND GRAPHIC DINMENSION 14. IC NO.
DEM 16210 SGH (FPCR) Product Specification 15. ELECTRO-OPTICAL DEFINITION Optical Characteristics Item Symbol Rise time Response time Temp. 0°C tr Decay time Condition Min. Typ. Max. φ =0° - - - 25°C - 52.4 - 0°C - - - θ =0° - 167.2 - φ =0° - td 25°C Contrast ratio Cr 25°C 25°C Viewing angle (CR≥ 2) θ 25°C θ =0° 5.
DEM 16210 SGH (FPCR) Product Specification Note 3. Definition of Contrast ratio (Cr) Brightness Curve for Selected Segment Brightness (%) B2 Brightness Curve for Non-selected Segment B1 Volt. Driving Voltage Brightness of Non-selected Segment (B2) Cr = Brightness of Selected Segment (B1) Note 4.
DEM 16210 SGH (FPCR) Product Specification 16. RELIABILITY TEST Operating life time: Longer than 50000 hours (at room temperature without direct irradiation of sunlight) Reliability characteristics shall meet following requirements.
DEM 16210 SGH (FPCR) Product Specification 20. OTHERS Liquid crystals solidify at low temperature (below the storage temperature range) leading to defective orientation of liquid crystal or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subjected to a strong shock at a low temperature.