DISPLAY Elektronik GmbH LCD MODULE DEM 16216 SYH-LY Product Specification Version: 2 13/Oct/2008
GENERAL SPECIFICATION MODULE NO. : DEM 16216 SYH-LY CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL VERSION 06.12.2001 1 METAL FRAME CHANGE 12.12.2001 2 CHANGED IC 13.10.2008 PREPARED BY: XYP DATE: 13.10.2008 APPROVED BY: MH DATE: 13.10.
DEM 16216 SYH-LY Product Specification CONTENTS 1. FUNCTIONS & FEATURES ---------------------------------------------------------------------------------------------------2 2. MECHANICAL SPECIFICATIONS -----------------------------------------------------------------------------------------2 3. EXTERNAL DIMENSIONS ----------------------------------------------------------------------------------------------------3 4.
DEM 16216 SYH-LY Product Specification 1. FUNCTIONS & FEATURES z z z z z z z MODULE NAME LCD TYPE DEM 16216 SYH-LY STN Yellow Green Transflective Positive Mode Viewing Direction Driving Scheme Power Supply Voltage Backlight Color VLCD Adjustable For Best Contrast Display contents Internal Memory z Interface z Operating Temperature z Storage Temperature : 6 o’clock : 1/16 Duty Cycle, 1/5 Bias : 5.0 Volt (typ.) : LED, Lightbox, Yellow-Green : 4.5 Volt (typ.
DEM 16216 SYH-LY Product Specification 3.
DEM 16216 SYH-LY Product Specification 4. BLOCK DIAGRAM VSS VDD V0 RS R/ W E DB0~DB7 COM1~16 LCD PANEL 2Li neX16Char act er s SEG41~80 ST7066U-0A SEG0~40 ST7065C A K B/ L 5. PIN ASSIGNMENT Pin No. Symbol 1 VSS Ground terminal of module. 2 VDD Supply terminal of module 5.0V. 3 V0 4 RS 5 R/W 6 E 7 DB0 8 DB1 9 DB2 10 DB3 11 DB4 12 DB5 13 DB6 14 DB7 15 LED – (K) Please also refer to 6.1 PCB drawing and description. 16 LED + (A) Please also refer to 6.
DEM 16216 SYH-LY Product Specification 6. PCB DRAWING AND DESCRIPTION 6.1 PCB DRAWING 6.2 DESCRIPTION: 6-2-1.The polarity of the pin 15and the pin 16: LED Polarity 15 Pin 16 Pin J3,J5 J2, J4 Each open Each closed Anode Cathode Each closed Each open Cathode Anode Note: In application module, J2=J4=open, J3=J5=0 Ohm. 6-2-2. The J1 is metal-bezel GND to module GND and J6 is mounting holes GND to module GND. Note: In application module, J1= J6=0 ohm. 6-2-3.
DEM 16216 SYH-LY Product Specification 6.3 EXAMPLE APPLICATION 6-3-1. The LED resistor should be bridged as following. R7 R8 R9 J7 6-3-2. The 15pin is the anode and the 16 pin is the cathode as following. J5 J2 J4 J3 6-3-3.The 15 pin is the cathode and the 16 pin is the anode as following. J2 J5 J4 J3 6-3-4. The metal-bezel is on ground as following. J1 6-3-5. The mounting hole is on ground as following.
DEM 16216 SYH-LY Product Specification 7. BACKLIGHT ELECTRONICS/OPTICAL SPECIFICATIONS 8. MAXIMUM ABSOLUTE POWER RATINGS (Ta=25°C) Item Power supply voltage(1) Power supply voltage(2) Input voltage Symbol VDD VLCD Standard value -0.3~+7.0 VDD-10.0~VDD+0.3 Operating temperature VIN Topr -0.3~VDD+0.
DEM 16216 SYH-LY Product Specification 9. DISPLAY DATA RAM (DDRAM) 10. ELECTRICAL CHARACTERISTICS 10-1 DC Characteristics (VDD=5V,Ta=25°C) Standard Value MIN TYP MAX Item Symbol Operating Voltage VDD 4.7 5.0 5.3 IDD1 ---- TBD 1.0 Supply Current LCD Driving Voltage Version: 2 IDD2 ---- TBD 0.6 VLCD 4.2 4.5 4.
DEM 16216 SYH-LY Product Specification 10-2 AC Characteristics Version: 2 PAGE: 9
DEM 16216 SYH-LY Version: 2 Product Specification PAGE: 10
DEM 16216 SYH-LY Product Specification 11.
DEM 16216 SYH-LY Product Specification 12. INITIALIZING BY INSTRUCTION 12-1.
DEM 16216 SYH-LY Product Specification 12-2.
DEM 16216 SYH-LY Product Specification 13.
DEM 16216 SYH-LY Product Specification 14. LCD MODULES HANDLING PRECAUTIONS Please remove the protection foil of polarizer before using. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. If the display panel is damaged and the liquid crystal substance inside it leaks out, do not get any in your mouth. If the substance come into contact with your skin or clothes promptly wash it off using soap and water.
