User Manual

ManualsBrandsDisplaydata ManualsElectronicseFlex Sign 500

Evaluation Kit

Getting

Started Guide

The information disclosed herein is the exclusive property of ZBD Displays

Ltd. and is not to be disclosed without the written consent of ZBD Displays

Ltd. No part of this publication may be reproduced or transmitted in any

form or by any means including electronic storage, reproduction, execution

or transmission without the prior written consent of ZBD Displays Ltd.

This document is intended for limited circulation.

The information contained in this document is subject to change without

written notice and should not be construed as a commitment by ZBD Dis-

plays Ltd. unless such commitment is expressly given in a covering docu-

ment.

Document Number: 550-0003-01

Date: 27th June 2008

Summary of content (8 pages)

PAGE 1
Evaluation Kit Getting Started Guide The information disclosed herein is the exclusive property of ZBD Displays Ltd. and is not to be disclosed without the written consent of ZBD Displays Ltd. No part of this publication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of ZBD Displays Ltd. This document is intended for limited circulation.
PAGE 2
Contents Minimum system requirements Processor: Memory: Free Disk Space: Microsoft Windows XP 1.2GHz 512 RAM 4GB Pro with Service Pack 2 Minimum system requirements 1 Installation 2 Create a Product 5 Assigning an EPOP 6 Updating an EPOP 7 Unassigning EPOPs 9 SQL Server Express .NET framework 2.0 Re-assigning EPOPs 10 Please note if you do not have these installed, they will be installed as part of the Bounce Software setup process.
PAGE 3
Installation Guide Now the Bounce Setup Wizard will start. Click Next Insert the Bounce Software CD into your CD-ROM drive. The install setup.exe should auto start. If it doesn’t, Click on Start> Run and type D:SETUP.EXE. Replace the D: with the appropriate drive letter for your CD-ROM if it is not D. Bounce is using a new installation application called Windows Installer.
PAGE 4
Enter your Company name and the Licence Key provided at the back of this document. Click Next Bounce Software To start the Bounce software go to Start > All Programs > ZBD Displays > Bounce > Bounce The following screen will appear, click Connect To complete the installation click Close Bounce Main screen Creating a Product Firstly you will need to create a dummy product to assign an EPOP to.
PAGE 5
Now enter your product details, in the following screen and click OK. To add more products repeat this task The following screen will appear, enter the EPOP serial number located on the back of the EPOP and click OK. In the above example we have created a product identifier for a 15” TV 0013004.
PAGE 6
All images stored within this location will display on the left side of the following screen below. To start Bounce Updater go to Start > All Programs > ZBD Displays > BounceUpdater>BounceUpdater To update an EPOP with an image, first you need to select the Product ID from the drop down list “Update Product”, then select the image you wish to update and click Update. The Status bar will show the current progress of the image update.
PAGE 7
Re-assigning EPOPs Regulatory Information To assign an EPOP that is currently unassigned, right click the product id and select Assign epop as shown below Safety Notices Take some time to read through the safety notices before installing the EPOP Communicator. Please observe all safety markings and instructions when using this product. Radio Transmission Regulatory Information The EPOP Communicator and the EPOP label have been tested to comply with the following standards.
PAGE 8
Europe - CE Declaration of Conformity We, ZBD Displays Limited of Regus Business Centre, Winkfield Lane, Windsor, Berkshire, SL4 4RU, England, declare under our sole responsibility that the ZBD EPOP Communicator and EPOP, to which this declaration relates is in conformity with the following EN300 220-2 V2.1.1 EN300 220-1 V2.1.1 EN301 489-1 V1.6.1 EN301 489-3 V1.4.