Specifications

Targus USB 2.0 Laptop Docking Station with Video
6
Targus USB 2.0 Laptop Docking Station with Video
7
Connecting the Docking Station to
Your Computer
After installing the docking station software, you are ready to connect the
docking station to your computer. To do this:
1 Connect the supplied AC power adapter to the AC power jack on the
docking station.
2 Connect one end of the USB cable to the docking station and the other
end into an available USB 2.0 port on your computer.
WARNING: THE DOCKING STATION WILL NOT FUNCTION PROPERLY WITHOUT
THE AC ADAPTER PLUGGED INTO AN AC OUTLET.
D C 5 V
• Green Tx light illuminates when connected to a network and the yellow
Rx light flashes when data is transmitting to or from the network.
NOTE: THE DOCKING STATION SUPPORTS HOT SWAPPING OF THE NETWORK CABLE.
Docking Station Ports
DVI
Audio In (MIC)
Audio Out (SPK)
Network
Cable
USB Ports
(White)
High Power USB
Ports (BLACK)
High Power USB
Ports (BLACK)
USB to PC
Connection
Lock loop
AC adapter
Standard lock slot
Back View
Right side Left side