Instruction Manual

ManualsBrandsDisplays2go ManualsDigital SignageDISPLAYS2GO DF043NLB, DF043TLB 43 Inch Digital Signage

1

2

3

4

5

6

7

8

9

Table Of Contents

8 / 28

Wheel and base installation steps

1. Install 4 casters in the corresponding holes at the bottom of the base (Fig. 2), so that the casters are

installed on the base (Fig. 3). Tighten all casters with the supplied screwdriver.

Fig. 1 Fig. 2 Fig. 3

2. Connect the base screws to the product base and the product body, and tighten all the base screws

with an Allen wrench.

Fig. 4 Fig. 5

3. The assembly is finished:

NOTE: Casters can be locked for safety.

Casters active state

Casters in stationary

state：Push the

brake down