Installation Guide

9/10/2019 Installation Guide – Disruptive Technologies
https://support.disruptive-technologies.com/hc/en-us/articles/360003190014-Installation-Guide 7/22
Step 5: Place sensors
Peel and stick to the surface
The sensors are equipped with a strong adhesive for permanent installation. When the #nal location is veri#ed, make sure the
surface is clean and dust-free. Peel the protective #lm from the backside of the sensor and place it. Firm application pressure
helps develop better adhesive contact and improve bond strength.
Placement on metal
If a sensor is placed directly on a metal surface the wireless range will be severely a!ected, therefore some caution is needed
for such placements. In cases where there is a considerable distance between the Sensor and Cloud Connector, we recommend
to not place sensors directly on metal. If the installation point requires placement on metal and wireless range is crucial, the
sensor should either be placed halfway on metal or an installation bracket orienting the sensor perpendicular to the metal
surface should be used (see illustration below). For more information on sensor placements on metal goto
Range in various
environments
.